« previous next »
Pages: [1]

Author Topic: Mulberry use as backing or make complete bow  (Read 1812 times)

0 Members and 1 Guest are viewing this topic.

Offline KelRob

  • Member
  • Posts: 7
Mulberry use as backing or make complete bow
« on: September 06, 2015, 07:05:57 pm »
Hi,

 I just got a 5" diameter x 60" trunk of mulberry. I would like to know:

 1. About how long would it take to air dry?

 2. Should I use it as a backing for my red oak board bows I plan on?

 3. Or, make it in to a bow just by itself?

 4. Should I remove the bark to make it dry quicker?

 KelRob
« Last Edit: September 06, 2015, 07:40:46 pm by KelRob »
Logged

Offline sleek

  • Member
  • Posts: 6,764
Re: Mulberry use as backing or make complete bow
« Reply #1 on: September 06, 2015, 08:22:49 pm »
5 years to dry.

Now that I depressed you, split it and rough out staves, 6 months or less depending where you live. That includes bark removal and end grain painting.

Id make bows as it is. Red oak backs itself well. 
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

owlbait

  • Guest
Re: Mulberry use as backing or make complete bow
« Reply #2 on: September 06, 2015, 08:31:40 pm »
Just split a wide 70" stave and shortened them to 66". They were debarked and have been drying for 10 months. Look good to go. Get after yours and have fun. I wish you much success!
Logged

Offline bowandarrow473

  • Member
  • Posts: 696
Re: Mulberry use as backing or make complete bow
« Reply #3 on: September 06, 2015, 10:02:45 pm »
Split into halves or quarters if you can, remove bark and rough to near bow dimensions, then seal the back and clamp to a board for 2-3 months. That's what I do for all my bows. Also make sure the ends are sealed or it WILL check on you.
Logged
Whatever you are, be a good one.

Offline KelRob

  • Member
  • Posts: 7
Re: Mulberry use as backing or make complete bow
« Reply #4 on: September 06, 2015, 10:58:28 pm »
What would one use to seal the ends?
Logged

Offline Loope

  • Member
  • Posts: 207
Re: Mulberry use as backing or make complete bow
« Reply #5 on: September 06, 2015, 11:04:07 pm »
I have used shellac to seal the ends, bullseye spray shellac is handy.  Lately I have been just using wood glue to seal the ends... it is easy to get, cheap, and I always have some around.
Logged

Offline bowandarrow473

  • Member
  • Posts: 696
Re: Mulberry use as backing or make complete bow
« Reply #6 on: September 07, 2015, 08:56:46 am »
I use TB3 to seal the ends, it's tough, waterproof and I have buttloads of it.
Logged
Whatever you are, be a good one.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Mulberry use as backing or make complete bow
« Reply #7 on: September 07, 2015, 09:02:46 am »
If you remove the bark and/or sapwood be sure to seal the back also.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Mulberry use as backing or make complete bow
« Reply #8 on: September 07, 2015, 09:51:56 am »
So many uses for one log. If it was in my hands? Id split it down the middle once and sit it in my basement for 8-10 months with bark on. After that time Id peel and seal it. Then take it upstairs where the climate is controlled at 72 deg and 50% humidity and let it sit for a month. After that, its bow material to me.

I rarely if ever seal ends anymore. I have seen almost every sealed end crack in some way, shape or form anyway.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Springbuck

  • Member
  • Posts: 1,545
Re: Mulberry use as backing or make complete bow
« Reply #9 on: September 09, 2015, 03:10:47 pm »
Quote from: KelRob on September 06, 2015, 10:58:28 pm
What would one use to seal the ends?

Sealant.  I know that's a "smart" answer, but it really is up to you.  Glue, polyurathane, wax, whatever, just make sure it gets done.

All mulberry I have used was pretty good bow wood.  I would split it, reduce it, and RESTRAIN IT!   It will warp all over if not strapped or clamped. 
Logged
Pages: [1]
« previous next »