« previous next »
Pages: [1] 2

Author Topic: First sinew job Hickory board molly  (Read 4712 times)

0 Members and 1 Guest are viewing this topic.

Offline ssgtchad

  • Member
  • Posts: 338
First sinew job Hickory board molly
« on: August 24, 2015, 03:46:36 pm »
I haven't posted a bow in a while... I discovered knife making but I'm back. I was in the process of making a molly from a hickory board I bought while on vacation and got a wild hair I thought I'd back it with sinew. The board was less than perfect I I figured backing it would add a little margin of safety.  I us ed the PatM method and it turned pretty good.  It's got a month or two of seasoning but here it is so far. Thanks for looking comments are always welcome. 
Logged
Always learning something new.

Offline ssgtchad

  • Member
  • Posts: 338
Re: First sinew job Hickory board molly
« Reply #1 on: August 24, 2015, 03:48:37 pm »


Logged
Always learning something new.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: First sinew job Hickory board molly
« Reply #2 on: August 24, 2015, 03:58:25 pm »
The sinew job looks good. You can draw it into a little more reflex while it is drying and it will give you more when it is dried.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: First sinew job Hickory board molly
« Reply #3 on: August 24, 2015, 04:31:50 pm »
My first sinew job was on a hickory board as well. I was told not to, but I'm glad I did. You don't need to sinew levers on a bow like that. They shouldn't be bending, so basically you just added tip weight out there. Take that sinew and add another layer on the working portions next time.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline bushboy

  • Member
  • Posts: 2,256
Re: First sinew job Hickory board molly
« Reply #4 on: August 24, 2015, 05:56:05 pm »
Love the profile!very close to the original by my eye.
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: First sinew job Hickory board molly
« Reply #5 on: August 24, 2015, 08:07:02 pm »
looks nice , congrats
Logged

Offline bowandarrow473

  • Member
  • Posts: 696
Re: First sinew job Hickory board molly
« Reply #6 on: August 24, 2015, 08:12:47 pm »
Looks good.
Logged
Whatever you are, be a good one.

Offline bowsandroses

  • Member
  • Posts: 302
Re: First sinew job Hickory board molly
« Reply #7 on: August 24, 2015, 08:15:31 pm »
Looks better than my sinew work.
Logged
My two cents worth of wisdom
One who seeks solitude will find their inner spirit.

A man who speaks to critters is a man with an audience who listens
                                              Hugh Ridenour

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: First sinew job Hickory board molly
« Reply #8 on: August 24, 2015, 08:18:47 pm »
Looks good .....can't wait to see it bending.... :)
DBar
Logged
Integrity is doing the right thing when no one is looking

Offline ssgtchad

  • Member
  • Posts: 338
Re: First sinew job Hickory board molly
« Reply #9 on: August 24, 2015, 08:37:31 pm »
It's kinda hard to tell but there us  very little sinew on the levers. The  issue I had was that im using back strap sinew from a elk and water buffalo they were real long! I also toasted the belly so I concerned that if I add any more reflex the belly will start to fret. I don't know what do y'all  think?   I don't think it's too late in the seasoning process to add reflex I just dont wanna mess it up. I was also debating flipping the tips just cuz I have a tendency to do stupid things like that  >:D advise would be appreciated  thanks ..and thanks for the earlier replies.
Logged
Always learning something new.

Offline ssgtchad

  • Member
  • Posts: 338
Re: First sinew job Hickory board molly
« Reply #10 on: August 24, 2015, 08:40:29 pm »
Quote from: Danzn Bar on August 24, 2015, 08:18:47 pm
Looks good .....can't wait to see it bending.... :)
DBar
hopefully I can leave it alone until it seasons.... yeah about that. I might need an intervention
  • :-\
Logged
Always learning something new.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: First sinew job Hickory board molly
« Reply #11 on: August 24, 2015, 09:44:20 pm »
Leave it be. Not much to gain now, just tid bits for the next go round.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: First sinew job Hickory board molly
« Reply #12 on: August 24, 2015, 10:40:32 pm »
After sinewing a bow I place it on the hot water heater in the utility room, out of sight, out of mind!  ;)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: First sinew job Hickory board molly
« Reply #13 on: August 25, 2015, 06:01:52 am »
Looks good to me, nice job so far. Now patients.  ;) :)
 Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: First sinew job Hickory board molly
« Reply #14 on: August 25, 2015, 08:15:46 pm »
Start another few and you will forget all about it. It works for me.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.
Pages: [1] 2
« previous next »