Author Topic: Elm ELB ?????????? (Read 3106 times)

ozark caveman · « **on:** February 06, 2008, 03:53:52 am »

I have a massive piece of Elm. It's 82" long. I laid it out and I made the limbs 1-3/4" wide and it has a rigid handle. However it's a little higher crowned than I would like so I was wondering if I could go ahead and do a narrower Mary Rose design and still maintain a high draw weight with acceptable string follow? Thanks!

M-P · « **Reply #1 on:** February 06, 2008, 05:12:20 am »

Hi, Why don't you ask the same question on the English warbow section. Those guys make heavier bows than you're liable to be aiming for, but some of them have a lot of experience at making elm elb style bows. Ron

ozark caveman · « **Reply #2 on:** February 06, 2008, 10:00:42 am »

I tried that. Not much activity there?

??

Marc St Louis · « **Reply #3 on:** February 06, 2008, 10:07:11 am »

I've never made a warbow out of Elm but I see no reason why not, as long as there's enough depth left. The high crown will not be a problem with an Elm flatbow though as it is strong in tension.

ozark caveman · « **Reply #4 on:** February 06, 2008, 10:30:07 am »

Thanks Marc! Now I'm torn between flatbow with a rigid handle or a MR design. What are the dimensions I should look for in a elm MR? If anyone has the ash dimensions I'm sure I can get close

Primitive Archer

Author Topic: Elm ELB ?????????? (Read 3106 times)

ozark caveman

Elm ELB ??????????

M-P

Re: Elm ELB ??????????

ozark caveman

Re: Elm ELB ??????????

Marc St Louis

Re: Elm ELB ??????????

ozark caveman

Re: Elm ELB ??????????