« previous next »
Pages: [1] 2 3

Author Topic: Little sliver bow 43# @ 26" 48" osage  (Read 6625 times)

0 Members and 1 Guest are viewing this topic.

Offline half eye

  • Member
  • Posts: 3,300
Little sliver bow 43# @ 26" 48" osage
« on: March 16, 2015, 09:46:59 am »
Hey fellas,
     This piece of wood was left from cleaning up some stave for a friend. The osgae was hand split and had some real bad tear-outs and annular ring separations, so I cleaned them up with a big bandsaw.
     This piece was 3/4" wide at one end and 1-1/4" at the other, had 2-3 bad tearouts on the thin edge, 3 pin knots right on the edge and 2 rings on the fat end and one on the thin end. Then there was the recurved dogleg at the small end, and a bunch of back violations......just couldn't bring myself to burn it.

I straightened some of the dog leg, flipped the strong end to match (well close anyway) and steamed in about 1" of reflex right in the middle. The wood was so small the only tool used was a small "four-in-hand" rasp file combo and a scraper.

Havent done any finish work and left it bare so you can see there is no backing or patches etc. The first pics are the usual and then some close-up poics of the "issues". Bow shoots very well for it's draw weight and I'm glad I salvaged it.

48" ntn, 43# @ 26", osage splinter. >:D
rich
« Last Edit: March 16, 2015, 09:50:06 am by half eye »
Logged

Offline half eye

  • Member
  • Posts: 3,300
Re: Little sliver bow 43# @ 26" 48" osage
« Reply #1 on: March 16, 2015, 09:47:59 am »
more pics
Logged

Offline half eye

  • Member
  • Posts: 3,300
Re: Little sliver bow 43# @ 26" 48" osage
« Reply #2 on: March 16, 2015, 09:48:34 am »
last couple
Logged

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Little sliver bow 43# @ 26" 48" osage
« Reply #3 on: March 16, 2015, 09:54:06 am »
Goes to show osage can handle almost anything
Logged

Offline ajooter

  • Member
  • Posts: 1,216
Re: Little sliver bow 43# @ 26" 48" osage
« Reply #4 on: March 16, 2015, 10:05:33 am »
Nice Lil shooter Rich....I rawhide backed mine last night and I'll finish tillering it later this week. 
Logged

Offline ajooter

  • Member
  • Posts: 1,216
Re: Little sliver bow 43# @ 26" 48" osage
« Reply #5 on: March 16, 2015, 10:14:24 am »
What do you have her braced @ Rich?
Logged

Offline Sidewinder

  • Member
  • Posts: 1,946
Re: Little sliver bow 43# @ 26" 48" osage
« Reply #6 on: March 16, 2015, 10:21:32 am »
Rich you da man on them shorties. Gives me courage to see how much shorter I can go. A sliver is right. It amazes me how little wood it takes to make a killin bow outta osage. Vyour tiller as always looks great.
Logged
"You know a tree by the fruit it bears"   God

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 31,893
  • if you have to ask you wouldn't understand ,Tenn.
Re: Little sliver bow 43# @ 26" 48" osage
« Reply #7 on: March 16, 2015, 10:35:48 am »
Got to love that, waste not want not mama always said..  ;) :)
Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Del the cat

  • Member
  • Posts: 8,297
    • Derek Hutchison Native Wood Self Bows
Re: Little sliver bow 43# @ 26" 48" osage
« Reply #8 on: March 16, 2015, 10:38:15 am »
I bet that bit of Osage was glad you saved it from the fire... 
One happy little bow :laugh:
Del
Logged
Health warning, these posts may contain traces of nut.

Offline Josh B

  • Member
  • Posts: 3,741
Re: Little sliver bow 43# @ 26" 48" osage
« Reply #9 on: March 16, 2015, 11:02:42 am »
Looks like a right snappy shooter to me!  Josh
Logged

Offline burchett.donald

  • Member
  • Posts: 2,436
Re: Little sliver bow 43# @ 26" 48" osage
« Reply #10 on: March 16, 2015, 11:03:02 am »
   Jeeeesh Rich, 26" outta 48" stave and hunting weight? I'd say you got all of that one :o Nice job on saving that piece and turning it into shooter bud...You do have a reputation for successfully bending them to the limit Sir 8) 8) 8)
                                                                                                                                       Don
Logged
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;

Offline half eye

  • Member
  • Posts: 3,300
Re: Little sliver bow 43# @ 26" 48" osage
« Reply #11 on: March 16, 2015, 11:54:07 am »
Thank you fellas, but it's just a piece of scrap and is a long ways from a "fine" bow. There is a certain amount of freedom goes with something you never thought had a chance, like not being worried about yankin it back, figured it would break anyway, but it didn't. Maybe because of it's low draw weight.

Hey Falcon, if this keeps up I might just rank it up there with Ironwood ::) >:D >:D

Doc, closest arrow weight I had for her was just over 11 gr/ pound and she shoots flat at 18yds cant get back no more till the snow cooperates.

Pappy, Dell  thank you sir's.

Sidewinder,  no big deal, retired and a lot of time to play, and cabin fever

AJ, judging by the tiller you got goin on yours is gonna be a screamer,sir. 8)

Don, I seen your OS shorty (oh ya it mine now and gets shot most every day) you sir are gettin all of it out of your bows as well ;)

thanks again
rich
Logged

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: Little sliver bow 43# @ 26" 48" osage
« Reply #12 on: March 16, 2015, 12:26:30 pm »
Quote from: Pappy on March 16, 2015, 10:35:48 am
Got to love that, waste not want not mama always said..  ;) :)
Pappy
+1
Logged
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline JonW

  • Member
  • Posts: 1,906
Re: Little sliver bow 43# @ 26" 48" osage
« Reply #13 on: March 16, 2015, 01:13:29 pm »
Osage+Rich=Enough.........  Man I hope you get some spring weather soon or you may run out of wood ;)
Logged

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Little sliver bow 43# @ 26" 48" osage
« Reply #14 on: March 16, 2015, 03:59:53 pm »
Nice one Rich!
DBar
Logged
Integrity is doing the right thing when no one is looking
Pages: [1] 2 3
« previous next »