Author Topic: tips for a noob please  (Read 5409 times)

0 Members and 1 Guest are viewing this topic.

Offline jayman448

  • Member
  • Posts: 540
tips for a noob please
« on: February 20, 2015, 01:27:26 am »
howdy. i am having a heck of a time thinning and making a nice sharp edge. any tips? could a dull flaker hinder my thinning?

Offline TRACY

  • Member
  • Posts: 4,523
Re: tips for a noob please
« Reply #1 on: February 20, 2015, 04:28:59 am »
Read through the post above thinning with pressure by tower.



Tracy
It is what it is - make the most of it!    PN500956

Offline Chippintuff

  • Member
  • Posts: 777
Re: tips for a noob please
« Reply #2 on: February 20, 2015, 10:48:01 am »
Howdy to you too. It sounds like you might be a Texan. Are you anywhere near College Station/Bryan? If so, we are having a knappers' get together at my house tomorrow. If not, there are other knappins happening in various places around the state from time to time.

WA

Offline PrimitiveTim

  • Member
  • Posts: 1,166
Re: tips for a noob please
« Reply #3 on: February 20, 2015, 02:02:44 pm »
Abrade abrade abrade before you try to push off a flake.  Also when you're pressure flaking put a lot of pressure and push in.  Get some cheap material to practice with like glass and just keep at it.  You'll start to get it figured out.  Also don't be afraid to try different things
Florida to Kwajalein to Turkey and back in Florida again.  Good to be home but man was that an adventure!

Offline Sasquatch

  • Member
  • Posts: 1,026
Re: tips for a noob please
« Reply #4 on: February 20, 2015, 03:13:06 pm »
Yep read the thinning with pressure above,by Tower.  But really you might not understand it completely.  Watch paleomanjim on YouTube about isolated platforms.  I will be at the CS area knapp in along with Tower, and many other knappers form Paleoplanet.   But if you want more answers to your question. Tell us what the flakes are doing or elaborate.

Offline jayman448

  • Member
  • Posts: 540
Re: tips for a noob please
« Reply #5 on: February 21, 2015, 03:02:37 am »
ill look at all those resources for sure. ive really just been winging it. i have made a few points but they are few and far between. as far as thinning goes im pathetic. in fact ive never thinned anything really substantially.

as for being a texan, i am farthest from that i can be i think. i am from the central interior of British Columbia Canada. The closest town is a Village and out here if you aint a logger or a trucker your a rancher XD so in that aspect perhaps I am close to a texan XD haha

Offline jayman448

  • Member
  • Posts: 540
Re: tips for a noob please
« Reply #6 on: February 23, 2015, 08:14:21 pm »
would an ishi stick do the job better then a flaker? im going through glass like a mad man and all i seem to ber doing is getting crappy little flakes and lots of shards in my foot XD im lucky to send one flake half way accross. ive been watching videos like crazy and am just at a loss for what im doing different XD

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: tips for a noob please
« Reply #7 on: February 26, 2015, 08:10:49 am »
Read through the post above thinning with pressure by tower.
X2


Tracy
(:::.) The ABO path is a new frontier to the past!

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: tips for a noob please
« Reply #8 on: February 26, 2015, 08:14:23 am »
Search my posts. I posted my journey as I was learning. You will have many of the same questions your path to flint knapping will be very similar.
(:::.) The ABO path is a new frontier to the past!

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: tips for a noob please
« Reply #9 on: February 26, 2015, 12:24:26 pm »
Flintknapping is a sport.  Welcome to the team.  We'll show you the game but you've got to practice to get good.   ;D

And by practice I mean LOTS of practice.
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline Parnell

  • Member
  • Posts: 5,556
Re: tips for a noob please
« Reply #10 on: February 26, 2015, 04:17:44 pm »
Flintknapping is a sport.  Welcome to the team.  We'll show you the game but you've got to practice to get good.   ;D

And by practice I mean LOTS of practice.

That's funny Patrick. 
My 2 cents - Platform preparation is key.  Pressure flaking...think of pressing parallel with the blade first (In), then down to pop it off.  Push instead of pry.
For percussion, how you hold the blade in your hand is about as important as exactly where you hit it the platform and at what angle.  Picture your holding point (pressure point for where you hold it) being opposite the blade from where you'll strike and hold on loosely under your point of impact.

Order the Whittaker Flintknapping book and study it...
1’—>1’

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: tips for a noob please
« Reply #11 on: March 02, 2015, 11:59:06 am »
 Jay there's only one thing I can say and that is keep going keep those little chips flying. Everyone on here has went through the same thing.

  No one knowing what there doing starting out. I've been knapping 25 or so years. I still have big trouble thining.                       

 Before long those little flakes will get bigger,and bigger. Before long you'll be over running those flakes.
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline le0n

  • Member
  • Posts: 540
Re: tips for a noob please
« Reply #12 on: March 02, 2015, 12:26:17 pm »
im going through glass like a mad man and all i seem to be doing is getting crappy little flakes...

show us the glass and the tool you're working with. also, show us an edge that you've worked.

from what i've found in my experience (which is minimal), is that some glass knaps differently than others. and when you get to working bottle bottoms, the concave/convex surfaces add another dimension of complexity.

keep at it though, because your technique will come with a little perseverance.

...
 Before long those little flakes will get bigger,and bigger. Before long you'll be over running those flakes.

i can't stand it when that happens. i've lost a few points that way.

Offline Jodocus

  • Member
  • Posts: 897
Re: tips for a noob please
« Reply #13 on: March 03, 2015, 09:03:29 am »
I'm by no means a more than intermediate level knapper, but one thing that hasn't been said: Knapping is very susceptible to negative emotions. Don't try to learn it in one go. When you get frustrated (and I believe to hear a hint of frustration in your post  ;) ) put it away for a while (weeks, not hours). There will be an noticeable step up when you get back to it.
Don't shoot!

Offline jayman448

  • Member
  • Posts: 540
Re: tips for a noob please
« Reply #14 on: March 03, 2015, 12:57:39 pm »
I'm by no means a more than intermediate level knapper, but one thing that hasn't been said: Knapping is very susceptible to negative emotions. Don't try to learn it in one go. When you get frustrated (and I believe to hear a hint of frustration in your post  ;) ) put it away for a while (weeks, not hours). There will be an noticeable step up when you get back to it.

didnt realize you could sense that through the screen XD haha might be a good idea to rest a while... after this last one.. haha