Author Topic: Curly osage bow finished  (Read 7724 times)

0 Members and 3 Guests are viewing this topic.

Offline Dvshunter

  • Member
  • Posts: 1,402
Re: Curly osage bow finished
« Reply #15 on: February 05, 2015, 04:31:36 pm »
That sucks clint. It was a pretty piece too. Even more surprised that it broke at 15 in. I assume that is "all the way back" for your t Rex arms. ::)
"There is a natural mystic blowing through the air; if you listen carefully now you will hear." Robert Nesta Marley

Offline adb

  • Member
  • Posts: 5,339
Re: Curly osage bow finished
« Reply #16 on: February 05, 2015, 06:56:39 pm »
Yup, I'd call that a tension failure. The picture where you put the pieces back together shows it. It failed in tension, then radiated down the limbs in both directions, leaving the little peak in the belly piece right under the failure.

Offline bow101

  • Member
  • Posts: 2,235
Re: Curly osage bow finished
« Reply #17 on: February 05, 2015, 07:14:54 pm »
Dam shame, but I guess I'm not the only one breaking....  >:( :o ::)  >:( :o
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Curly osage bow finished
« Reply #18 on: February 05, 2015, 07:20:21 pm »
I'm not going to give you any crap over this like some of these guys ....but
Integrity is doing the right thing when no one is looking

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Curly osage bow finished
« Reply #19 on: February 05, 2015, 08:28:33 pm »
Go ahead Bill.  I don't think I could have done anything to make this bow a shooter.
I started out with nothin' and I still got most of it left

Offline Sidewinder

  • Member
  • Posts: 1,946
Re: Curly osage bow finished
« Reply #20 on: February 05, 2015, 08:34:23 pm »
Man, too bad on that one Clint. Good thing you did'nt impale yourself with it. Now ifn that had been southern kansas osage it prolly would held together... >:D
"You know a tree by the fruit it bears"   God

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Curly osage bow finished
« Reply #21 on: February 05, 2015, 08:52:10 pm »
Go ahead Bill.  I don't think I could have done anything to make this bow a shooter.
I was going to say...but... it would have made a beautiful gun stock...  :laugh: :laugh: got ya buddy, I know, you did the best possible, I have no doubt about it.  it was just a bastard of a piece of osage for a bow.  Good for you, for giving it a try.  I bet curly osage is very rare.  If you have a piece big enough to make a gun stock out of someone's bound to want it. I can just imagine it finished with a little age on it.  Hell, if I was still making muzzle loaders I would trade you big time for it, I can see a beautiful Hawkins stock out of it.
« Last Edit: February 05, 2015, 09:06:30 pm by Danzn Bar »
Integrity is doing the right thing when no one is looking

Offline duke3192

  • Member
  • Posts: 195
  • pm109331
Re: Curly osage bow finished
« Reply #22 on: February 05, 2015, 09:05:43 pm »
All my osage bows that break from now-on are going to be classified as curly-grained.
charter member of traditional bow hunters of Florida.

Offline paulsemp

  • Member
  • Posts: 1,918
Re: Curly osage bow finished
« Reply #23 on: February 05, 2015, 09:18:00 pm »
Ya finished her up nicely! Congrats

Offline Arrowind

  • Member
  • Posts: 1,428
Re: Curly osage bow finished
« Reply #24 on: February 05, 2015, 09:26:49 pm »
Dang
Talking trees. What do trees have to talk about, hmm... except the consistency of squirrel droppings?

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Curly osage bow finished
« Reply #25 on: February 05, 2015, 09:45:12 pm »
That sucks clint. It was a pretty piece too. Even more surprised that it broke at 15 in. I assume that is "all the way back" for your t Rex arms. ::)

It broke at full draw DVS.  That's about 24" for my T-rex arms  ;)
I started out with nothin' and I still got most of it left

Offline Zion

  • Member
  • Posts: 783
  • The blacksmith's mare walks barefoot
Re: Curly osage bow finished
« Reply #26 on: February 05, 2015, 11:00:08 pm »
good call on the knife scales, too bad about the break
The secret of life is learning to make your own luck.

Offline Eric Krewson

  • Member
  • Posts: 5,432
Re: Curly osage bow finished
« Reply #27 on: February 06, 2015, 12:11:05 am »
I know from making flintlocks that curly wood is a mixture of wood as hard as a brick and wood that is very soft and weak.

Save your broken bow for tip overlays and handles, curly osage makes spectacular overlays.


Offline Joec123able

  • Member
  • Posts: 1,769
Re: Curly osage bow finished
« Reply #28 on: February 06, 2015, 12:14:42 am »
Never seen curly Osage... Looks freakin beautiful!!
I like osage

Offline Hamish

  • Member
  • Posts: 1,557
Re: Curly osage bow finished
« Reply #29 on: February 06, 2015, 03:26:26 am »
Hi OO, Just curious to what the dimensions (width and length) were? I have seen some curly wood bows survive, and others that break in tension or chrysal.
                                                                                                      Hamish.