Author Topic: chasing a ring on yew sapwood  (Read 7025 times)

0 Members and 1 Guest are viewing this topic.

Offline adb

  • Member
  • Posts: 5,339
chasing a ring on yew sapwood
« on: January 21, 2008, 12:52:06 pm »
Hi,
How important is it to chase a ring on the sapwood for making a yew selfbow? I've heard both yay and nay. Is the sapwood not a single growth ring? With very tight growth rings, more than 50/in., how hard is it?
Thanks.

Offline markinengland

  • Member
  • Posts: 698
Re: chasing a ring on yew sapwood
« Reply #1 on: January 21, 2008, 05:35:49 pm »
Chris Boyton has told me that he aims for consistent thickness of yew sapwood, tries not to cut into a growth ring (valley) if he can avoid it but doesn't bother too much about leaving mountains of grain. He thinks it doesn't matter as much as some people think and he is a very experienced bowyer.

Offline Loki

  • Member
  • Posts: 381
Re: chasing a ring on yew sapwood
« Reply #2 on: January 21, 2008, 09:29:40 pm »
adb3112,John Marshall's Christmas Bow doesnt follow the single ring on the sapwood,it looks pretty fine and he hasnt had any problems with it.
Andy
Durham,England