« previous next »
Pages: [1]

Author Topic: Vine maple and heat treating/bending  (Read 2138 times)

0 Members and 1 Guest are viewing this topic.

Offline dane lund

  • Member
  • Posts: 103
Vine maple and heat treating/bending
« on: January 26, 2015, 04:54:40 pm »
I guess the question is in the title. Have a kids vine maple that I need to straighten, and heat some reflex into.
Dry heat OK?
Logged
In His grip,
Smallpatch

Offline steve b.

  • Member
  • Posts: 999
Re: Vine maple and heat treating/bending
« Reply #1 on: January 26, 2015, 04:58:12 pm »
Dry heat is the only way to put some reflex in it, as far as I know, but if you are bending the bow laterally in a limb or at the handle then I would steam.  Straighten it first and then heat treat it.
Logged

Offline vinemaplebows

  • Member
  • Posts: 1,419
Re: Vine maple and heat treating/bending
« Reply #2 on: January 26, 2015, 08:29:24 pm »
Never seen much help (other then dryer wood) heat treating vine maple. Whoops ::) my mind was on heat treating not straightening....I agree with Mullet, that's what I use.
« Last Edit: January 26, 2015, 09:19:35 pm by vinemaplebows »
Logged
Debating is an intellectual exchange of differing views...with no winners.

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Vine maple and heat treating/bending
« Reply #3 on: January 26, 2015, 09:11:22 pm »
I use the Micro wave oven with wet rags wrapped around what I'm bending.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Gordon

  • Member
  • Posts: 3,299
Re: Vine maple and heat treating/bending
« Reply #4 on: January 27, 2015, 01:04:15 am »
Dry heat works fine on vine maple as long as the wood is dry.
Logged
Gordon

Offline dane lund

  • Member
  • Posts: 103
Re: Vine maple and heat treating/bending
« Reply #5 on: January 27, 2015, 10:35:18 pm »
Thanks guys!

I was pretty successful last night. Induced about 1 ½" of reflex, and took most of a dogleg out of one tip.
I'm going to re tiller a bit, see where the string lies, and if necessary, heat and adjust a bit.

Thanks for all your help!!
Logged
In His grip,
Smallpatch

Offline Springbuck

  • Member
  • Posts: 1,545
Re: Vine maple and heat treating/bending
« Reply #6 on: January 30, 2015, 03:27:31 pm »
Quote from: vinemaplebows on January 26, 2015, 08:29:24 pm
Never seen much help (other then dryer wood) heat treating vine maple. Whoops ::) my mind was on heat treating not straightening....I agree with Mullet, that's what I use.


 This surprises me.  Heat treating greatly improves bows made of my local wild maple in Utah.  Climate is different, of course.....

If you steam reflex into most woods and tiller, much of the reflex will just pull out.
Logged
Pages: [1]
« previous next »