« previous next »
Pages: 1 [2] 3

Author Topic: First self bow (BL stave from Wizardgoat)  (Read 13575 times)

0 Members and 2 Guests are viewing this topic.

Offline Joec123able

  • Member
  • Posts: 1,769
Re: First self bow (BL stave from Wizardgoat)
« Reply #15 on: February 09, 2015, 03:07:54 am »
Looks awesome!! Id like to see it unstrung!
Logged
I like osage

Offline Del the cat

  • Member
  • Posts: 8,298
    • Derek Hutchison Native Wood Self Bows
Re: First self bow (BL stave from Wizardgoat)
« Reply #16 on: February 09, 2015, 03:12:59 am »
great work
Del
Logged
Health warning, these posts may contain traces of nut.

Offline Hrothgar

  • Member
  • Posts: 1,475
Re: First self bow (BL stave from Wizardgoat)
« Reply #17 on: February 09, 2015, 07:34:48 am »
Nice tiller, looks quite powerful.
Logged
" To be, or not to be"...decisions, decisions, decisions.

Offline NeolithicMan

  • Member
  • Posts: 562
  • No beliefs, just ideas
Re: First self bow (BL stave from Wizardgoat)
« Reply #18 on: February 09, 2015, 07:56:56 am »
Welcome to PA! Thats a sweet first bow!
Logged
John, 40-65# @ 28" Central New York state. Never enough bows, never enough arrows!

Offline Aaron H

  • Member
  • Posts: 3,437
Re: First self bow (BL stave from Wizardgoat)
« Reply #19 on: February 09, 2015, 08:06:37 am »
Beautiful looking bow, that full draw looks sweet!
Logged

Offline GlisGlis

  • Member
  • Posts: 1,512
Re: First self bow (BL stave from Wizardgoat)
« Reply #20 on: February 09, 2015, 10:52:21 am »
Beautiful bow
I'd like to see unstrung and frontal pict !
Logged

Offline TimBo

  • Member
  • Posts: 1,037
Re: First self bow (BL stave from Wizardgoat)
« Reply #21 on: February 09, 2015, 10:57:37 am »
Sweet!  Looks like you are getting a great bend out of it.  Nice work.  (I also can't wait to see more pics!)
Logged

Offline rps3

  • Member
  • Posts: 1,514
Re: First self bow (BL stave from Wizardgoat)
« Reply #22 on: February 09, 2015, 11:09:16 am »
Looking good, I too would like to see unbraced picture. I have always heat treated my bows at floor tiller before being pulled quite that far though.
Logged

Offline Treebeard

  • Member
  • Posts: 11
Re: First self bow (BL stave from Wizardgoat)
« Reply #23 on: February 09, 2015, 11:26:08 am »
Here's an unbraced picture. I'm going to come clean and admit this pic was taken after I reclamped it to my form and heat treated it. It had taken about an inch and a half of set during tillering, so I heated it into the profile you see here. I'm going to let it rest until the weekend before I brace it again. In the mean time, I'm going to sand and start finishing, apply tip overlays and cut and form the leather grip.
Logged
I'm the other guy from Vancouver.

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: First self bow (BL stave from Wizardgoat)
« Reply #24 on: February 09, 2015, 01:53:39 pm »
Nice work Nathan. Will be interesting to see if any of that reflex stays.  Even if you lose some I doubt it'll go back to where it was prior to heat treating
Logged

Offline Treebeard

  • Member
  • Posts: 11
Re: First self bow (BL stave from Wizardgoat)
« Reply #25 on: February 09, 2015, 04:10:59 pm »
Fingers crossed! Thanks again for all the help.
Logged
I'm the other guy from Vancouver.

Offline soy

  • Member
  • Posts: 2,897
  • pm106221
Re: First self bow (BL stave from Wizardgoat)
« Reply #26 on: February 09, 2015, 05:32:03 pm »
Looking good ;)
Logged
Is this bow making a sickness? or the cure...

Offline VicNova

  • Member
  • Posts: 238
Re: First self bow (BL stave from Wizardgoat)
« Reply #27 on: February 11, 2015, 08:39:45 pm »
Oooh!! I love the curves on that bow man!! 
Logged
Ypsilanti,  Michigan

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: First self bow (BL stave from Wizardgoat)
« Reply #28 on: February 11, 2015, 08:59:28 pm »
Real nice work on that shorty, that full draw looks good. One suggestion if its Ok, you may want to wait on the finishing until you string it and check the tiller again. Sometimes the heat treating changes things a bit and you may want to do a little scraping again on the belly to either adjust the draw weight back down or fine tune any tiller changes the heating may have caused.
Looks smooth and fast though and I'm impressed with the amount of bend you got out of a 50"'er. :)
Logged
I ain't broke but I'm badly bent.

Offline huisme

  • Member
  • Posts: 1,036
  • I'm Marc, but not that Marc.
Re: First self bow (BL stave from Wizardgoat)
« Reply #29 on: February 12, 2015, 03:33:48 pm »
+1 Mr. Bent.

Even with a bit of string follow that thing is a beauty, great use of a short piece of locust. No chrysalis, I'm assuming? The bend looks clean enough to deter frets, which would keep the locust as snappy as possible-- combined with well-narrowed tips I'd expect this thing to spit arrows like a champ ;)
Logged
50#@26"
Black locust. Black locust everywhere.
Mollegabets all day long.
Might as well make them short, save some wood to keep warm.
Pages: 1 [2] 3
« previous next »