« previous next »
Pages: [1]

Author Topic: Damascus points  (Read 4077 times)

0 Members and 2 Guests are viewing this topic.

Offline sleek

  • Member
  • Posts: 6,764
Damascus points
« on: October 29, 2014, 05:49:48 pm »
I work with a knife maker who forges his own Damascus.  I was wondering what interest there would be in points made of it were I to start making them and what design?
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Re: Damascus points
« Reply #1 on: October 29, 2014, 05:55:36 pm »
Depends on what you would want for them. It is super cool metal. I would like a few just for fun.
Logged
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.

Offline sleek

  • Member
  • Posts: 6,764
Re: Damascus points
« Reply #2 on: October 29, 2014, 06:00:18 pm »
I would do my best to be in the value area of what the black diamond and Eskimos are....
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Eric Garza

  • Member
  • Posts: 589
Re: Damascus points
« Reply #3 on: October 29, 2014, 06:14:56 pm »
I'd be interested. What are you looking for in trade? What styles can you make? I'd want something that's single bevel, like  the Abowyer points.
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Damascus points
« Reply #4 on: October 29, 2014, 07:22:29 pm »
I'd be interested if you can keep the weight down.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline sleek

  • Member
  • Posts: 6,764
Re: Damascus points
« Reply #5 on: October 29, 2014, 07:32:12 pm »
What weight is acceptable?
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Damascus points
« Reply #6 on: October 30, 2014, 01:13:21 am »
Under 180 grns for me. I have a knifemaker friend here that made me some and he finally got me one around 140gn.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline aaron

  • Member
  • Posts: 1,037
Re: Damascus points
« Reply #7 on: October 30, 2014, 11:25:36 am »
I'd be interested if they were 145-200 grains. Would these be screw in or glue on? Should be no wider than 1 1/4 for me.
Logged
Ilwaco, Washington, USA
"Good wood makes great bows, but bad wood makes great bowyers"

Offline sleek

  • Member
  • Posts: 6,764
Re: Damascus points
« Reply #8 on: October 30, 2014, 12:51:31 pm »
For the attachment,  I was thinking the easiest is a trad point with a tang. I will have to look into how to make a socket to make a glue on. A screw on wouldnt be very hard because id just make a thicker tang and thread it.
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Stoker

  • Member
  • Posts: 1,729
Re: Damascus points
« Reply #9 on: October 30, 2014, 02:18:58 pm »
Glue on- you would probaly have to forge it like a medievle broadhead.. youtube has some interesting vids.. Have some O2 been thinking about it.. Tie on tang would be the simplest and they look cool..
Thanks Leroy
Logged
Bacon is food DUCT tape - Cipriano

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Damascus points
« Reply #10 on: October 30, 2014, 04:58:54 pm »
The ones I had were like a Trade point, just tie it on with sinew.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline sleek

  • Member
  • Posts: 6,764
Re: Damascus points
« Reply #11 on: October 30, 2014, 06:11:31 pm »
These will be 15n20 and 1095 steel. I may make a press that will form a tang into a round socket but weight will be an issue to overcome there.

By the way I got permission from him today to make points and he would give me the steel to do it. So I will start out with trade point tang with a typical 2" long 1" wide point and see what that weighs. Will try .050 thick for starters. 
« Last Edit: October 30, 2014, 06:17:58 pm by sleek »
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Damascus points
« Reply #12 on: October 31, 2014, 01:42:31 pm »
Cool, looking forward to seeing what you come up with.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Eric Garza

  • Member
  • Posts: 589
Re: Damascus points
« Reply #13 on: October 31, 2014, 08:47:11 pm »
If I trade for some, I'd want them to be trade points that I can wind on with sinew or thread soaked in glue. I'd want mine on the lighter side too, and perhaps 7/8 - 1 inch wide, certainly no wider than that. I'd want them on the lighter side to, up to 150 grains would be fine, lighter would be fine too.
Logged
Pages: [1]
« previous next »