Author Topic: Potential Flight Bow (second edition)  (Read 10234 times)

0 Members and 1 Guest are viewing this topic.

Offline redhawk55

  • Member
  • Posts: 122
    • bowXplosion
Re: Potential Flight Bow (second edition)
« Reply #15 on: October 16, 2014, 05:02:10 am »
Great and fast!
..........the way of underdoing.............

Offline PatM

  • Member
  • Posts: 6,737
Re: Potential Flight Bow (second edition)
« Reply #16 on: October 16, 2014, 09:13:23 am »
The silk is to test out a more scientifically applied silk backing. It is also there to protect any slight run-outs in bamboo fibers over such a short, narrow limb.
 Then  it is also there to contain things  and protect me when I blow it up by overdrawing it . Which I intend to do.  >:D

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Potential Flight Bow (second edition)
« Reply #17 on: October 16, 2014, 09:16:20 am »
Should be interesting
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline PatM

  • Member
  • Posts: 6,737
Re: Potential Flight Bow (second edition)
« Reply #18 on: October 16, 2014, 04:38:35 pm »
Silk applied.
 



Offline Badger

  • Member
  • Posts: 8,124
Re: Potential Flight Bow (second edition)
« Reply #20 on: October 16, 2014, 05:41:26 pm »
  I am glad that you wrapped it, I was going to suggest that, I don't think it will be any problem at all wrapped.

Offline DC

  • Member
  • Posts: 10,396
Re: Potential Flight Bow (second edition)
« Reply #21 on: October 16, 2014, 06:13:39 pm »
The silk wrapped like that is just for a ballistics bag, right? Doesn't add any strength?

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Potential Flight Bow (second edition)
« Reply #22 on: October 16, 2014, 06:15:50 pm »
does that mean the bow is pre tillered???

Offline PatM

  • Member
  • Posts: 6,737
Re: Potential Flight Bow (second edition)
« Reply #23 on: October 16, 2014, 07:14:24 pm »
It's not actually wrapped Steve. That's just the marks left from the tape. It does curl down the sides though so it's effectively 3/4 wrapped.
 The belly is not covered.
 As to whether silk adds strength try pulling a one inch strip in half.  I put five layers on.

Offline adb

  • Member
  • Posts: 5,339
Re: Potential Flight Bow (second edition)
« Reply #24 on: October 16, 2014, 10:28:18 pm »
I look forward to seeing this thing bend

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,913
  • Eddie Parker
Re: Potential Flight Bow (second edition)
« Reply #25 on: October 17, 2014, 12:22:07 am »
I'd worry about the Ipe blowing in my face. Have you ever seen that stuff let go?
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline PatM

  • Member
  • Posts: 6,737
Re: Potential Flight Bow (second edition)
« Reply #26 on: October 18, 2014, 08:20:35 pm »
Here's a few more pics. Siyahs tapered a bit and refined. Black Cherry bridges in place and rough shaped. The bridges are lengthy because the belly was so narrow and I wanted a decent glue surface area.





Offline Blaflair2

  • Member
  • Posts: 2,042
Re: Potential Flight Bow (second edition)
« Reply #27 on: October 18, 2014, 09:10:31 pm »
Looks pretty sweet! Ur work is always impeccable... Looks like ya got it handled

eddie, I've blown up 3/4 ipe bows I've made. One punches me in the face. I have one floor tillered now. Hoping I done it right this time.
Nothing ventured nothing gained

Offline PatM

  • Member
  • Posts: 6,737
Re: Potential Flight Bow (second edition)
« Reply #28 on: October 25, 2014, 12:07:14 am »
Stress points wrapped and  bow strung. Managed to do a Flemish twist with long loops that don't twist themselves up the siyah.
 





Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Potential Flight Bow (second edition)
« Reply #29 on: October 25, 2014, 12:48:44 am »
looking great,, did you shoot it ???  :)