Author Topic: stone id ?  (Read 1717 times)

0 Members and 1 Guest are viewing this topic.

Offline Tyke

  • Member
  • Posts: 343
stone id ?
« on: September 27, 2014, 12:42:06 am »
This is the stone that is  all over where i hunt in utah this is all that i could get with out tools its all in about 100 lb boulders other than these small chunks plus i was deer hunting but it does have a conchodial fracture to it the pieces that i found that had chips out of them were like a toffee brown inside but werent worth taking. Heres some flakes i took off this morning
« Last Edit: September 27, 2014, 03:26:53 pm by Tyke »
why buy it when you can build it

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: stone id ?
« Reply #1 on: September 28, 2014, 06:05:21 pm »
Looks like a coarse chert or some kind of very hard limestone.  You might be able to make arrowheads out of it but I think knapping ceramic floor tiles would be easier.  Utah has lots of good, knappable stone.  Try and look for rounded or "amoeba" type stones with a cortex.

Here's a couple links:

http://geology.utah.gov/utahgeo/rockmineral/rockhounder.htm
(look at lower right area - near Capitol Reef Nat'l Park)


http://www.heraldextra.com/news/local/north/lehi/utah-valley-knapping-association/article_d4796e36-0695-11e3-b234-001a4bcf887a.html
« Last Edit: September 28, 2014, 06:09:34 pm by jackcrafty »
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr