« previous next »
Pages: [1]

Author Topic: edge angle on trade points.  (Read 2056 times)

0 Members and 1 Guest are viewing this topic.

Offline sleek

  • Member
  • Posts: 6,764
edge angle on trade points.
« on: August 29, 2014, 12:33:08 am »
I am wondering if on .57 thick steel ( shovel head ) is a 60 degree bevel a good enough angle to mai tain a sharp edge and get sharp enough, or should I use a different angle for the bevel? Its a single bevel head 2" long 1" wide.
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: edge angle on trade points.
« Reply #1 on: August 29, 2014, 12:54:06 am »
Somewhere between 25 deg to 35 deg I believe. If you are doing single bevel probably a bit steeper.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline stickbender

  • Member
  • Posts: 3,828
Re: edge angle on trade points.
« Reply #2 on: August 30, 2014, 10:50:41 pm »

     You can do a 23-25 degree bevel, and a micro bevel on that. ;)

                                Wayne
Logged
Pages: [1]
« previous next »