Author Topic: Best laminating glue U.K.  (Read 5798 times)

0 Members and 1 Guest are viewing this topic.

Offline Tommytinker

  • Member
  • Posts: 76
Best laminating glue U.K.
« on: August 19, 2014, 07:33:05 pm »
Looking for a smooth on equivalent that I can get in the U.K.

Any thoughts guys? 

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Best laminating glue U.K.
« Reply #1 on: August 19, 2014, 08:22:51 pm »
Can you get Unibond? Made by Nelson Paint Co. (US)  If not try Weldwood Plastic Resin. It is a urea glue like Unibond(Urac185 was the original) in powder form and all you do is add water to mix. I learned about Weldwood Plastic Resin from a guy from Italy and it worked well for me.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Tommytinker

  • Member
  • Posts: 76
Re: Best laminating glue U.K.
« Reply #2 on: August 19, 2014, 08:41:48 pm »
I can't get unibond but I can get weldwood.

Does it need air to cure? Or does it cure like an epoxy?

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Best laminating glue U.K.
« Reply #3 on: August 19, 2014, 11:47:59 pm »
It's a chemical reaction like Urac or Unibond. It cures at room temp(approx. 70 deg (F)) but cures faster at higher temps. I haven't used it in a few years so I don't remember the specifics about it.  It is relatively inexpensive here. Maybe do a test with it first before you trust it to a bow but I glued hickory and boo backings on different woods and riser blocks and never had a glue failure.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline PatM

  • Member
  • Posts: 6,737
Re: Best laminating glue U.K.
« Reply #4 on: August 20, 2014, 12:36:08 am »
You can also get 'Cascamite" there. Pretty sure it's more or less the same thing as Weldwood.

Offline WillS

  • Member
  • Posts: 1,905
Re: Best laminating glue U.K.
« Reply #5 on: August 20, 2014, 04:16:34 am »
Resorcinol, Cascamite, Resintite or a bog standard 2 part epoxy all work for gluing up bows.  I didn't believe the 2 part epoxy would work, but somebody I shoot with makes heavy laminated warbows using epoxy with no failures yet. 

Offline Tommytinker

  • Member
  • Posts: 76
Re: Best laminating glue U.K.
« Reply #6 on: August 20, 2014, 09:01:02 am »
Thanks for the replies.

Any brands of epoxy that could be recommended? Again, that I can get in the UK.

Offline PatM

  • Member
  • Posts: 6,737
Re: Best laminating glue U.K.
« Reply #7 on: August 20, 2014, 10:27:42 am »
You can get Araldite and WEST G-Flex from Axminster. They also have the equivalent of Urac and Resorcinol.
 You have many choices and some would say the last two are better than Epoxy.
« Last Edit: August 20, 2014, 10:33:53 am by PatM »

Offline WillS

  • Member
  • Posts: 1,905
Re: Best laminating glue U.K.
« Reply #8 on: August 20, 2014, 11:00:38 am »
Bloke I shoot with in the UK swears by Araldite 2 part epoxy, the stuff in the tubes.  One set of tubes does one lamination, so you'd need two packs for a tri lam.

Offline RBLusthaus

  • Member
  • Posts: 753
Re: Best laminating glue U.K.
« Reply #9 on: August 20, 2014, 12:13:32 pm »
i began using weldwood when URAC went under a few years ago at Pat Bs suggestion and I have been happy.  I have had no major issues with it, and it was quite inexpensive compared to the others.  I only use it though when working w Bamboo.  Wood to wood I still use TBIII. 
Russ

Offline bobnewboy

  • Member
  • Posts: 329
  • https://www.flickr.com/photos/bob_d14/
    • The Company of Sixty Field Archers
Re: Best laminating glue U.K.
« Reply #10 on: August 20, 2014, 01:28:19 pm »
Humbrol Extraphen (resourcinol) for me.  Super tough 2-pack adhesive.  Sticks any wood to any other, including oily exotics, in my experience.
"The Englishman takes great pride in his liberty. He values this gift more than all the joys of life, and would sacrifice everything to retain it. The populace would have you understand there is no country in the world where such perfect freedom can be enjoyed, as in England!" Frenchman, London 1719

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Best laminating glue U.K.
« Reply #11 on: August 20, 2014, 01:35:04 pm »
I use Resintite.
I have also used a 2hour epoxy. Araldite is ridiculously expensive.
Del
Health warning, these posts may contain traces of nut.

Offline WillS

  • Member
  • Posts: 1,905
Re: Best laminating glue U.K.
« Reply #12 on: August 20, 2014, 02:21:17 pm »
That's true.  I would imagine any 2 part epoxy is the same as Araldite.  You can get those good 151 ones in most shops.

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Best laminating glue U.K.
« Reply #13 on: August 20, 2014, 03:00:55 pm »
That's true.  I would imagine any 2 part epoxy is the same as Araldite.  You can get those good 151 ones in most shops.
They differ hugely in properties, I got the 2 hour one from a model supplies place, can't remember the name, but they had loads of good stuff at reasonable prices in sensible quantities.
Del
Health warning, these posts may contain traces of nut.

Offline Tommytinker

  • Member
  • Posts: 76
Re: Best laminating glue U.K.
« Reply #14 on: August 20, 2014, 04:38:47 pm »
Wow, there really is a whole world of glue out there!
Thank you for all the replies, it's been most helpful!
Just to clarify can I completely wrap a glue up, if using one of the urac style urea formaldehyde powdered glues?  Or does it need air to cure?