« previous next »
Pages: [1] 2 3

Author Topic: adding draw weight?  (Read 6603 times)

0 Members and 2 Guests are viewing this topic.

Offline Tyke

  • Member
  • Posts: 343
adding draw weight?
« on: August 06, 2014, 08:53:31 pm »
Just finished tillering osage bow it came out 38#@30" and i want 45 will making it a recurve add weight
Logged
why buy it when you can build it

Offline DarkSoul

  • Member
  • Posts: 1,315
    • Orion Bows
Re: adding draw weight?
« Reply #1 on: August 06, 2014, 09:03:50 pm »
Short answer: yes.

Longer answer: we need more info to make a good assessment whether recurving the bow is the correct measure to increase draw weight. Other options include, but are not limited to, heat treatment, reflexing, shortening the bow, adding a backing and starting a new bow.
Logged
"Sonuit contento nervus ab arcu."
Ovid, Metamorphoses VI-286

Offline SLIMBOB

  • Member
  • Posts: 3,759
  • Deplorable Slim
Re: adding draw weight?
« Reply #2 on: August 06, 2014, 09:04:55 pm »
Yes.  If it doesn't break it, or cause it to take a lot of set which offsets some of the gain, but yes you can add some weight.  Design would be the key question here in my mind before answering whether you SHOULD add reflex.
Logged
Liberty, In God We Trust, E Pluribus Unum.  Distinctly American Values.

Offline Tyke

  • Member
  • Posts: 343
Re: adding draw weight?
« Reply #3 on: August 06, 2014, 09:27:59 pm »
I've already heat treated after floor tillering to straighten the stave about I could take off about 2 to 3 inches off each end thanks for the advice
Logged
why buy it when you can build it

Offline Tyke

  • Member
  • Posts: 343
Re: adding draw weight?
« Reply #4 on: August 06, 2014, 09:30:19 pm »
Ill try them all except the backing thanks darksoul
Logged
why buy it when you can build it

Offline autologus

  • Member
  • Posts: 1,092
Re: adding draw weight?
« Reply #5 on: August 06, 2014, 09:35:03 pm »
Before you cut anything give us some details about the bow and some pics because some of those options may not be best for your bow.

Grady
Logged
Proud Hillbilly from Arkansas.

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Re: adding draw weight?
« Reply #6 on: August 06, 2014, 10:04:53 pm »
Here is a photo of it. Osage, bendy handle. I'll leave the rest to Tyke.
Logged
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: adding draw weight?
« Reply #7 on: August 06, 2014, 10:09:54 pm »
Doesn't look like the handle is bending much to me.... :-\
DBar
Logged
Integrity is doing the right thing when no one is looking

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Re: adding draw weight?
« Reply #8 on: August 06, 2014, 10:30:23 pm »
Nope, My bad. From memory it is 72 TTT, and he was wanting to put an arrow shelf in after the tiller and knocks are complete. I also believe it is flat.
Logged
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.

Offline Tyke

  • Member
  • Posts: 343
Re: adding draw weight?
« Reply #9 on: August 06, 2014, 10:32:14 pm »
Yes is not a bendy and i did put a shelf
Logged
why buy it when you can build it

Offline autologus

  • Member
  • Posts: 1,092
Re: adding draw weight?
« Reply #10 on: August 06, 2014, 10:54:32 pm »
You could gain 5 to 10# from heat treating the belly and flipping the tips.  The tiller looks pretty good.

Grady
Logged
Proud Hillbilly from Arkansas.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,542
Re: adding draw weight?
« Reply #11 on: August 06, 2014, 10:58:54 pm »
Can we see an unbraced profile pic and a back profile pic.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 31,904
  • if you have to ask you wouldn't understand ,Tenn.
Re: adding draw weight?
« Reply #12 on: August 07, 2014, 06:16:31 am »
Is you draw really 30 inches,if not you can cut it way down and flip the tips and gain lots of weight. What is you draw length ?
  Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: adding draw weight?
« Reply #13 on: August 07, 2014, 08:34:22 am »
The best way to add weight is to start another bow and keep the draw weight higher. Adding weight is a real tail chaser, Ive tried enough to know.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Re: adding draw weight?
« Reply #14 on: August 07, 2014, 08:51:03 am »
I am going over after work today to get some better photos. His camera is a bit messed up. Pappy, Tyke is about 6'4, so he really does have a 30 inch draw.
Logged
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.
Pages: [1] 2 3
« previous next »