« previous next »
Pages: [1]

Author Topic: White oak board  (Read 944 times)

0 Members and 1 Guest are viewing this topic.

Offline redboard

  • Member
  • Posts: 40
White oak board
« on: May 06, 2014, 11:46:22 am »
Should I trap the back on a white oak board bow? Also, I'm going to start at 1 6/8 at the fades, taper to 1/2 inch with 30" limbs...I'm thinking to use 5/8" as my starting thickness to begin tillering. Does that sound about right?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: White oak board
« Reply #1 on: May 06, 2014, 12:09:55 pm »
You don't need to trap the back. What overall length is your bow? The dimensions sound good. After first brace and you have good string alignment you can narrow the tips to 3/8" or smaller. Leave the last 6" to 8" thick(1/2") at the nocks.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline redboard

  • Member
  • Posts: 40
Re: White oak board
« Reply #2 on: May 06, 2014, 12:18:49 pm »
Prolly 68ntn
Logged
Pages: [1]
« previous next »