Author Topic: Board Bows-Best Woods  (Read 4529 times)

0 Members and 1 Guest are viewing this topic.

Offline BrokenArrow

  • Member
  • Posts: 168
Board Bows-Best Woods
« on: April 28, 2014, 03:46:40 pm »
What combo of wood works the best for a backed board bow?
I had a maple backed black walnut core bow blow up at full draw after about shooting 200-300 shots.
I have had better luck with hickory backed on either ash, hickory or jatoba (brazilian cherry).

Offline bubby

  • Member
  • Posts: 11,054
Re: Board Bows-Best Woods
« Reply #1 on: April 28, 2014, 04:04:56 pm »
for a hard backer personally, in order, maple, white oak, hickory, boo
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline DarkSoul

  • Member
  • Posts: 1,315
    • Orion Bows
Re: Board Bows-Best Woods
« Reply #2 on: April 28, 2014, 05:56:57 pm »
How do you define "works the best"? Does that mean: "does not break", or "shoots the most pleasantly" or "shoots the fastest" or "most bang for bucks"?
If there was just one combination that is the best, everyone would be using that combination and nothing else. It's obviously not as simple as that. There are soooo many factors to take into account. I could advice you to use Mongolian tulipwood, but if you don't live in Mongolia this advice would be totally useless.
In general, the best performing bows require a design that matches the belly wood's mechanical properties to the backing wood's properties. Hence, a maple backed walnut flatbow has a better performance than a hickory backed ash ELB. Maple is also a better backing wood for walnut in general than hickory, since the higher tensile strength of the hickory can overpower the walnut belly. Some typical, well matched combos are bamboo/hickory backed ipé, maple/ash backed walnut, maple/ash backed jatoba.
"Sonuit contento nervus ab arcu."
Ovid, Metamorphoses VI-286

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: Board Bows-Best Woods
« Reply #3 on: April 28, 2014, 06:04:26 pm »
The fastest hardest hitting bow that's ever been through my shop and also made from a board was a 63"ntn 1 1/8"wide bamboo backed ipe. With slightly flipped tips.
Clatskanie, Oregon

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Board Bows-Best Woods
« Reply #4 on: April 28, 2014, 06:09:54 pm »
Most failed backings is generally the person that obtained the backing. If you make or choose a good backing it really shouldn't break.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Knapper

  • Member
  • Posts: 1,057
  • David Atnip
Re: Board Bows-Best Woods
« Reply #5 on: April 28, 2014, 06:13:58 pm »
BA, many times I'll just take a hickory board, rip a piece off, run the cut side through the planer, flip the first piece over and glue it back on. Hickory on hickory.
Love it.
Knapper
Ad Dare Servire
PM104250

Offline bubby

  • Member
  • Posts: 11,054
Re: Board Bows-Best Woods
« Reply #6 on: April 28, 2014, 06:49:28 pm »
if you have any before blowup and after post the pics so we can see what happened
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Arrowind

  • Member
  • Posts: 1,428
Re: Board Bows-Best Woods
« Reply #7 on: April 29, 2014, 12:43:33 am »
BA, many times I'll just take a hickory board, rip a piece off, run the cut side through the planer, flip the first piece over and glue it back on. Hickory on hickory.
Love it.
Knapper

Dude.  That's cool.  I believe you have explained that many times before but I like the concept.


brokenarrow - 


What ever you use for a backing....any of the previously mentioned woods make sure the grain is straight, straight, straight. 
Talking trees. What do trees have to talk about, hmm... except the consistency of squirrel droppings?

Offline Wooden Spring

  • Member
  • Posts: 437
Re: Board Bows-Best Woods
« Reply #8 on: April 29, 2014, 09:00:33 am »
One of my favorite combinations is hickory backed jatoba. I use hickory pretty exclusively as a backing material just because of where I am, it's available, cheap, and AWESOME.... But I've also used hickory and purpleheart, hickory and red oak, and even a few hickory backed hickory - the glue up there just so that I could get some reflex into the bow. 

Still, my personal favorite has got to be hickory and jatoba!

"Everything that moves shall be food for you..." Genesis 9:3