« previous next »
Pages: [1] 2

Author Topic: maple on maple r/d  (Read 2035 times)

0 Members and 1 Guest are viewing this topic.

Offline bubby

  • Member
  • Posts: 11,054
maple on maple r/d
« on: March 10, 2014, 04:47:03 pm »
this was an experiment, first of a new form, 66" ttt and about 50# @ 29", smooth and fast but I think I need to shorten the outers on the next one, you r/d guys let me know about that, I layed it against the form today and each limb has about an inch of set from the form, so all in all I guess it was a success  bison tips and tung oil and paste wax, hope ya like it bub



Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: maple on maple r/d
« Reply #1 on: March 10, 2014, 04:51:19 pm »
looks good man
Logged

Offline bow101

  • Member
  • Posts: 2,235
Re: maple on maple r/d
« Reply #2 on: March 10, 2014, 05:32:39 pm »
I took photos of my 66" R/D maple yesterday but having camera problems, I glued mine up using 4" blocks on the tips and a center block about 3" ,  I don't use blocks at mid limb.   At any rate it is much more pronounced than yours, it took roughly over 3/4" of set.
Hopefully will post pics very soon.
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline burchett.donald

  • Member
  • Posts: 2,437
Re: maple on maple r/d
« Reply #3 on: March 10, 2014, 05:41:41 pm »
Nice work Bubby, looks fast 8)
Logged
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;

Offline adb

  • Member
  • Posts: 5,339
Re: maple on maple r/d
« Reply #4 on: March 10, 2014, 06:17:21 pm »
Hey, Bubster... I think it's bending too much right at the fades, even for a R/D design. JMHO.
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: maple on maple r/d
« Reply #5 on: March 10, 2014, 06:32:34 pm »
adam that was the same thing I thought and paulsemp too, funny thing is I didn't touch the fades except to get the marks out of it, worked it mostly mid out, I think it should be wider to start and that may solve that, that being said these things are a bear to tiller for me, thank's for the comment i'm a big boy and it takes a lot for me to get all butt hurt :laugh:
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bubby

  • Member
  • Posts: 11,054
Re: maple on maple r/d
« Reply #6 on: March 10, 2014, 06:33:18 pm »
thanks Jordan
thanks donald
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: maple on maple r/d
« Reply #7 on: March 10, 2014, 06:35:00 pm »
I don't know how those r/d bows are supposed to bend bub but thats a good looking bow to me, if its shooting nice and the profile doesn't change then I'd say you done good.  :-\   Nice work.
Logged
I ain't broke but I'm badly bent.

Offline bubby

  • Member
  • Posts: 11,054
Re: maple on maple r/d
« Reply #8 on: March 10, 2014, 06:41:03 pm »
thanks Greg, they always end up looking like an Egyptian angular bow to me, least the ones I build do :laugh:
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline lostarrow

  • Member
  • Posts: 1,348
Re: maple on maple r/d
« Reply #9 on: March 10, 2014, 09:59:01 pm »
When you are bending it on the tillerng tree how does it look like it's bending? Are the fades bending too much , or is the full draw pic just fooling the eye? These are tricky buggers to tiller for sure.
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: maple on maple r/d
« Reply #10 on: March 10, 2014, 11:22:04 pm »
I think it looks worse than it is, the fades don't work as hard as it looks, I think I need to re work the form and see what happens on the next it's only taken an inch of set
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline lostarrow

  • Member
  • Posts: 1,348
Re: maple on maple r/d
« Reply #11 on: March 11, 2014, 12:12:46 am »
That's what I was thinking based on the unbraced pic. It already looked like it was bending right out of the fades. Regardless of it's deceptive ways , ....... how does it shoot? It's not all about the looks after all ;) If it's barely working in the fades and is bending smoothly out the rest of the limb, is it not a well tillered bow?  The reflex is likely doing it's job   and the deflex  should be taking some stress off . I'm guessing it draws very smooth and releases the arrow in a like fashion . Looking forward to the next  off of the modified form!
Logged

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: maple on maple r/d
« Reply #12 on: March 11, 2014, 12:14:39 am »
Nice work Bubby.  You have been cranking them out lately.
Logged
I started out with nothin' and I still got most of it left

Offline bubby

  • Member
  • Posts: 11,054
Re: maple on maple r/d
« Reply #13 on: March 11, 2014, 12:29:45 am »
Thanks Clint, ya I finished this , the static and I started and finished two cookie cutter bows this weekend  now that this is out of the way I got three to start
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bubby

  • Member
  • Posts: 11,054
Re: maple on maple r/d
« Reply #14 on: March 11, 2014, 12:32:05 am »
Lostarrow, it's fast smooth and quiet in the hand, don't know what else you want
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹
Pages: [1] 2
« previous next »