« previous next »
Pages: [1]

Author Topic: Hickory Backings  (Read 1617 times)

0 Members and 1 Guest are viewing this topic.

Offline Ink

  • Member
  • Posts: 301
  • Jason Chollett
Hickory Backings
« on: February 13, 2014, 08:05:53 pm »
Recently came into some hickory and was wondering. For a hickory backing, is the piece of hickory quarter sawn or one isolated ring from the tree? I have never laminated anything and am just curious.
Logged
Chew Motrin, drink water, drive on

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Hickory Backings
« Reply #1 on: February 13, 2014, 08:07:27 pm »
Either.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Hickory Backings
« Reply #2 on: February 13, 2014, 08:11:46 pm »
I would say quarter sawn would yield you more backings and be more economical then trying to chase every ring of the log though! I think rift sawn is good too, anything with straight grain and little run off is usable.
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline Ink

  • Member
  • Posts: 301
  • Jason Chollett
Re: Hickory Backings
« Reply #3 on: February 13, 2014, 08:22:05 pm »
cool, thanks for the replys. May need to make a few backings, never know when i might need one.
Logged
Chew Motrin, drink water, drive on
Pages: [1]
« previous next »