Badger, I did not pull it past 15 inches, but I worked it up to that just to be safe. I will do as you suggested and see if it makes a difference. Tiller looks just as good today as it did then, granted only at 15 inches. Shot this thing a bunch over the summer and so it's well shot in. Or it was.
Jackcrafty, I would not have said this was a particularly dense piece of wood. Might have been. Smallish diameter stave with a pretty high crown. Very knotty piece of wood, neon yellow. Seemed pretty average to me at the time as far as density went. It took very little set from start to finish, but may be. 40lbs??
Shot a bunch of mine today. All the others are where they should be so RH not a factor as far as I can tell. Pretty wet day really. RH got extremely low last week, but only for a day or 2.
Refigured and its 30lbs. I've never had one change half that much.
I've had them lose a little weight on hot humid days, and gain a little on bitter cold and dry days, but it's near 80 here today after a rain.