« previous next »
Pages: [1]

Author Topic: ERC warbow?  (Read 3445 times)

0 Members and 1 Guest are viewing this topic.

Offline Thesquirrelslinger

  • Member
  • Posts: 1,245
ERC warbow?
« on: January 28, 2014, 04:19:47 pm »
So as far as I have been able to tell... ERC seems to be yew's weaker cousin.
I know they are not actually related.
However, I happen to have 4 drop dead perfect staves of ERC from a tree nearly 8" in diameter, knot free.
All 80" long.
I want to make a warbow.
Doable?
Logged
"Insanity is doing the same thing over and over again and expecting different results"

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: ERC warbow?
« Reply #1 on: January 28, 2014, 04:47:32 pm »
Marc St. Louis posted a fantastic erc warbow a while back. I would shoot him a PM if I were you. It will probably have to be quite large dimensions to reach warbow weight.
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline adb

  • Member
  • Posts: 5,339
Re: ERC warbow?
« Reply #2 on: January 29, 2014, 08:34:15 pm »
Yup, I was gonna say the same. Probably find it if you do a search.
Logged

Offline }|{opukc

  • Member
  • Posts: 156
  • Patience my friend !!!
Re: ERC warbow?
« Reply #3 on: February 04, 2014, 01:50:07 pm »
Logged
Best regards from Bulgaria - George
Pages: [1]
« previous next »