« previous next »
Pages: [1] 2

Author Topic: Anybody know of a good quality needle file for cutting nocks?  (Read 5303 times)

0 Members and 1 Guest are viewing this topic.

Offline toomanyknots

  • Member
  • Posts: 3,132
Anybody know of a good quality needle file for cutting nocks?
« on: January 26, 2014, 09:45:46 am »
The only ones I have used are the ones from home depot and stuff from the set of 5 or 6 for like 10 bucks. They work ok for wooden overlays, but on horn they suck pretty bad. Now I also use one of those round hacksaw blades, which work great and are real fast to cut on wood or horn, but they leave deep scratches in the nocks on horn that can't be burnished out. So I was wondering if anybody knew of a better quality needle file, or a round hacksaw blade that wouldn't leave deep scratches?
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline NeolithicMan

  • Member
  • Posts: 562
  • No beliefs, just ideas
Re: Anybody know of a good quality needle file for cutting nocks?
« Reply #1 on: January 26, 2014, 09:47:57 am »
chain saw blade sharpening iles work good but if you can afford Nicholson need files (or any rasp/file from them) they last forever and work extremely well
Logged
John, 40-65# @ 28" Central New York state. Never enough bows, never enough arrows!

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Anybody know of a good quality needle file for cutting nocks?
« Reply #2 on: January 26, 2014, 09:48:31 am »
I use chainsaw files. 
Logged
I started out with nothin' and I still got most of it left

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Anybody know of a good quality needle file for cutting nocks?
« Reply #3 on: January 26, 2014, 10:03:39 am »
I use a $1.50 chain saw file and when it looses it rasping effect I buy another.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Anybody know of a good quality needle file for cutting nocks?
« Reply #4 on: January 26, 2014, 10:36:25 am »
Sweet, I did not even know chainsaw files existed,  O:). I will pick one up soon as I can. Is there a good size for nocks I should order?

EDIT: I guess this is a stupid question,  :), I probably want like 1/8" I guess. Thanks everyone!
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline Mark Smeltzer

  • Member
  • Posts: 324
Re: Anybody know of a good quality needle file for cutting nocks?
« Reply #5 on: January 26, 2014, 10:51:05 am »
Chainsaw file.
Logged

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Anybody know of a good quality needle file for cutting nocks?
« Reply #6 on: January 26, 2014, 11:07:09 am »
A tile saw is cheap, long lasting and v effective, finish off with a small dia chainsaw file or regular needle file.
You can use the bare blade, but it's better in a saw frame as they are a bit soft and flexible..
Del
Logged
Health warning, these posts may contain traces of nut.

Offline PatM

  • Member
  • Posts: 6,737
Re: Anybody know of a good quality needle file for cutting nocks?
« Reply #7 on: January 26, 2014, 11:10:06 am »
Quote from: toomanyknots on January 26, 2014, 10:36:25 am
Sweet, I did not even know chainsaw files existed,  O:).
My goodness toomanyknots. That's almost as bad as not knowing about a Farrrier's rasp.  :laugh:
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Anybody know of a good quality needle file for cutting nocks?
« Reply #8 on: January 26, 2014, 11:11:32 am »
Go to any hardware store and buy one. Get the smallest they have.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline hunterbob

  • Member
  • Posts: 890
Re: Anybody know of a good quality needle file for cutting nocks?
« Reply #9 on: January 26, 2014, 11:13:12 am »
I bought a set of chainsaw files at ace hardware comes in a set of two. They work great.
Logged

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Anybody know of a good quality needle file for cutting nocks?
« Reply #10 on: January 26, 2014, 11:33:07 am »
Quote from: PatM on January 26, 2014, 11:10:06 am
Quote from: toomanyknots on January 26, 2014, 10:36:25 am
Sweet, I did not even know chainsaw files existed,  O:).
My goodness toomanyknots. That's almost as bad as not knowing about a Farrrier's rasp.  :laugh:

Yeah, thats pretty bad,   ;D.
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: Anybody know of a good quality needle file for cutting nocks?
« Reply #11 on: January 26, 2014, 01:33:49 pm »
Nicholson 1/8th saw file.
Logged
Clatskanie, Oregon

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,913
  • Eddie Parker
Re: Anybody know of a good quality needle file for cutting nocks?
« Reply #12 on: January 26, 2014, 08:58:46 pm »
I've got some sweet Nicholson's needle rasp that work a lot better then chain saw files. PM me if you want to work out a trade. I brought quiet a few to the Classic last year and will bring  more this year.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline seabass

  • Member
  • Posts: 2,267
Re: Anybody know of a good quality needle file for cutting nocks?
« Reply #13 on: January 26, 2014, 09:40:43 pm »
Eddie,i bought a needle rasp at woodcraft for 6 bucks.they are awesome.cuts wood like a rabid beaver.i think Daniel is looking for something more subtle.needle rasp will tear up a horn nock.you still need to get one Daniel.
Logged
Middletown,Ohio

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Anybody know of a good quality needle file for cutting nocks?
« Reply #14 on: January 26, 2014, 09:48:22 pm »
Save one back for me if you can Eddie.  I'm sure we can work out a trade for one at the Classic.
Logged
I started out with nothin' and I still got most of it left
Pages: [1] 2
« previous next »