« previous next »
Pages: [1]

Author Topic: question about bow lenght  (Read 1953 times)

0 Members and 1 Guest are viewing this topic.

Offline adams89

  • Member
  • Posts: 205
question about bow lenght
« on: January 16, 2014, 05:20:18 pm »
Hi everybody

I got a New stave of osage  its a little snake, but it has no major knots,
I would like to know your oppinions in the dimensions

I want to geht a 70 - 80 pound bow out of it.
My last one was 67 inches long and pulls 82# and im wondering if i can go shorter without a backing and without risking set

So please let me know what you think about the  dimensions.

Thanks Johannes
« Last Edit: January 16, 2014, 05:24:20 pm by adams89 »
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: question about bow lenght
« Reply #1 on: January 16, 2014, 05:56:55 pm »
Johannes, What is your draw length?  For a 28" draw  you could go 64" to 66".  Make the bow a little wider than you did for the 67" bow.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Fred Arnold

  • Member
  • Posts: 1,566
  • From up on Munson Creek
Re: question about bow lenght
« Reply #2 on: January 16, 2014, 05:58:17 pm »
I find the shorter length bows taking more set but I'm convinced it's because of my longer draw length (28 1/2) and I may have not left them wide enough for the length.
Logged
I found many years ago that it is much easier and more rewarding working with those that don't know anything than those that know it all.

Offline adams89

  • Member
  • Posts: 205
Re: question about bow lenght
« Reply #3 on: January 16, 2014, 06:15:30 pm »
Oh sorry my drawlegth is 27  ;D
And im planning in making the bow 1 1/2  inches wide  so what would be your oppinion in that ?
Logged

Offline Badger

  • Member
  • Posts: 8,124
Re: question about bow lenght
« Reply #4 on: January 16, 2014, 06:19:40 pm »
   I just finished an 82#@29" osage. 65" long. I made it 1 7/8 at the fades and 1 1/2 mid limb. I used a 10" handle and fade area. It didn't take more than 1/2" set. I have pulled it out to 30". I plan to shorten it to 62" and keep the weight about 80#@28. Bow has about 1" induced reflex.
Logged

Offline Badger

  • Member
  • Posts: 8,124
Re: question about bow lenght
« Reply #5 on: January 16, 2014, 06:21:08 pm »
  You should be ok with that if you don't use the pyramid design. Past 70# I might want to go a tad wider. I made mine extra wide because of the odd tiller I used.
Logged

Offline adams89

  • Member
  • Posts: 205
Re: question about bow lenght
« Reply #6 on: January 16, 2014, 06:23:13 pm »
Quote from: Badger on January 16, 2014, 06:19:40 pm
   I just finished an 82#@29" osage. 65" long. I made it 1 7/8 at the fades and 1 1/2 mid limb. I used a 10" handle and fade area. It didn't take more than 1/2" set. I have pulled it out to 30". I plan to shorten it to 62" and keep the weight about 80#@28. Bow has about 1" induced reflex.

That sounds nice ! I would love to See a picture of that bow!!! :o
Logged

Offline adams89

  • Member
  • Posts: 205
Re: question about bow lenght
« Reply #7 on: January 16, 2014, 06:33:09 pm »
Im planning in a parallel limb design, my aim is to get a very short selfbow, with a good drawweight and a high performance, im from germany and not that experienced with osage  (2 Bows), so im relying in you guys and your knowledge, my main bowwood is elm ash yew etc. But i realy love osage !! So please tell me your opinion!!!
« Last Edit: January 17, 2014, 04:42:08 am by adams89 »
Logged
Pages: [1]
« previous next »