Author Topic: Help  (Read 5673 times)

0 Members and 1 Guest are viewing this topic.

Offline adb

  • Member
  • Posts: 5,339
Re: Help
« Reply #15 on: January 10, 2014, 06:19:12 pm »
throw in hard maple as a backer, it works great

A big 'ole +1

Offline blacktailcody

  • Member
  • Posts: 26
Re: Help
« Reply #16 on: January 10, 2014, 06:45:27 pm »
Thank you everyone for the welcome and the help.

Offline bubby

  • Member
  • Posts: 11,054
Re: Help
« Reply #17 on: January 10, 2014, 07:21:22 pm »
yep adb, I like hard maple way better than hickory  for a backer
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline WhitefeatherFout

  • Member
  • Posts: 89
Re: Help
« Reply #18 on: January 10, 2014, 11:37:16 pm »
Welcome.  In my opinion, you should get a knotty, knarly piece of Osage to make your first bow.  No joke here.  I learned more that way than anything else.  A board bow, maybe, to learn tillering, but hit a knarly Osage and learn some problem solving.  With the help of the fine folks here, and there are many a good self bowyers here, you can learn a bunch in a hurry.  I'll donate ya knarly ole stave if you'll post your questions and pics in here.  Just message me and let me know.  Best of luck.  Matt

Offline Crogacht

  • Member
  • Posts: 455
Re: Help
« Reply #19 on: January 11, 2014, 12:37:33 am »
I like to try to understand things where I can, but sometimes practical experience is the only way to really know. But, is anyone able to shed some light on why hard maple would be good, but sapele would be bad?

According to this, they are basically the same wood :P... except for rot resistance and workability.

http://www.wood-database.com/lumber-identification/hardwoods/sapele/

http://www.wood-database.com/lumber-identification/hardwoods/hard-maple/

The numbers could be wrong of course, or rather, inaccurate based on lots of factors, but it would be interesting, for me, to know why the difference in preference when it comes to bow making.