« previous next »
Pages: [1]

Author Topic: Elm question  (Read 1244 times)

0 Members and 1 Guest are viewing this topic.

Offline Frode

  • Member
  • Posts: 400
Elm question
« on: January 07, 2014, 04:25:19 pm »
Hi all,
I've often read or heard that elm has a tough, interlocked grain, and I've used it successfully in a few bows backed with hickory.  I have a few boards left, and they are probably about as good as what I've used in the past, but, do you think these are good enough to use by themselves?  I've boosted the contrast way up on this shot, so that the grain and run off shows better.  The actual colors are a lot more subtle.
What are your thoughts?
Thanks,
Frode
Logged
If it doesn't rap the lintel, it might not be a longbow.

Offline half eye

  • Member
  • Posts: 3,300
Re: Elm question
« Reply #1 on: January 07, 2014, 04:30:58 pm »
With plain sawed boards that much grain "overlap" that's showing on the broad sides I would definitely back those Mr. Frode. I don't think you have enough thickness to chase a ring even if you were so inclined.

Anyway, just one opinion, eh?
rich
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Elm question
« Reply #2 on: January 07, 2014, 04:31:50 pm »
I agree with Rich.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Frode

  • Member
  • Posts: 400
Re: Elm question
« Reply #3 on: January 07, 2014, 05:44:59 pm »
Thanks, guys!  I kind of figured as much, but better to ask!
Frode
Logged
If it doesn't rap the lintel, it might not be a longbow.
Pages: [1]
« previous next »