« previous next »
Pages: [1]

Author Topic: Got a little carried away  (Read 4265 times)

0 Members and 1 Guest are viewing this topic.

Offline J05H

  • Member
  • Posts: 478
Got a little carried away
« on: November 28, 2013, 03:53:06 pm »

I started roughing this one out a few months back and I got in a hurry and ended up with one limb really narrow.
It happened while I was working around the big knot in the fade. The drawknife dug in and the limb split out and this is what i was left with. Its been in the corner ever since. Do you guys think it will still work. Its about 68" ttt.



BTW the knot is right in the fade, it basically is the fade.
Logged
If you never have time to do it right, you'll always have time to do it over.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Got a little carried away
« Reply #1 on: November 28, 2013, 03:56:05 pm »
It should be OK at 1" most of its length. It will come out thicker but that isn't a problem for osage. Be sure you have a single back ring. It might be tricky around that knot.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline J05H

  • Member
  • Posts: 478
Re: Got a little carried away
« Reply #2 on: November 28, 2013, 04:00:12 pm »
That's what I wanted to hear. It's already roughly at one ring, I just need to clean it up. And I'm pretty happy with the knot. Should I narrow the other limb to match?
Logged
If you never have time to do it right, you'll always have time to do it over.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Got a little carried away
« Reply #3 on: November 28, 2013, 05:58:42 pm »
Will you post a pic of the whole stave?
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline J05H

  • Member
  • Posts: 478
Re: Got a little carried away
« Reply #4 on: November 28, 2013, 06:00:41 pm »
Sure. I'll have to wait till I get back Home this evening.
Logged
If you never have time to do it right, you'll always have time to do it over.

Offline DarkSoul

  • Member
  • Posts: 1,315
    • Orion Bows
Re: Got a little carried away
« Reply #5 on: November 28, 2013, 06:03:12 pm »
So it's osage, right?
It should be okay with low to medium draw weight. Leave it full length; the little bit of extra length will compensate for some of the lack in width. Maybe keep the draw weight slightly lowish, below 50 pounds or so. A higher draw weight might result in more set, and a less efficient bow. Not the end of the world, though.
Logged
"Sonuit contento nervus ab arcu."
Ovid, Metamorphoses VI-286

Offline J05H

  • Member
  • Posts: 478
Re: Got a little carried away
« Reply #6 on: November 28, 2013, 06:51:13 pm »
Yes its Osage. That's kinda what I was thinking. I was trying for a target bow.
Logged
If you never have time to do it right, you'll always have time to do it over.

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Got a little carried away
« Reply #7 on: November 28, 2013, 07:00:00 pm »
Continue on. bet you can get mid 40s out of it. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline wood_bandit 99

  • Member
  • Posts: 197
  • Shoot straight my friends!!   55#@26"
Re: Got a little carried away
« Reply #8 on: November 28, 2013, 08:20:36 pm »
I have a bendy handle osage bow that is 1" wide and tapers to .5" almost and it is a speed demon. It is 60" ttt and 55# @ 26"
Logged
"Judge a man by his questions, not his answers" ~Anonymous

   "The person who says it cannot be done should not interrupt the person who is doing it." ~Chinese Proverb

Offline J05H

  • Member
  • Posts: 478
Re: Got a little carried away
« Reply #9 on: November 28, 2013, 11:07:39 pm »
For those who wanted to see the whole stave, here ya go.
I know it looks like the upper limb is longer but its because Its leaning toward me.



Logged
If you never have time to do it right, you'll always have time to do it over.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Got a little carried away
« Reply #10 on: November 28, 2013, 11:41:04 pm »
Yes, I'd narrow the upper limb to come closer to the width of the other limb especially the outer 1/3 of that limb.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline steve b.

  • Member
  • Posts: 999
Re: Got a little carried away
« Reply #11 on: November 29, 2013, 12:10:59 am »
I'm surprised you guys want to keep the weight below 50#.  I still have alot to learn, especially with osage.  I'd narrow the limbs to the 1" and taper the last, say, 8", staying fairly parallel but not perfectly. 
Logged
Pages: [1]
« previous next »