Author Topic: Pics of finished fox quiver added!  (Read 5590 times)

0 Members and 1 Guest are viewing this topic.

Offline CherokeeKC

  • Member
  • Posts: 574
  • PM108323
Pics of finished fox quiver added!
« on: September 25, 2013, 01:48:38 pm »
I have a case skinned grey and red fox hide.  I have already stitched up a leather quiver insert to go inside the fox hide.  The quiver will be plains style.  My question is what piece to attach the stiffener to and also how to attach the liner and shoulder strap?  I am struggling with whether to attach stiffener on outside of fox hide or to liner that will go inside fox hide.  And then depending on how I deal with that, I am still not sure how to attach strap.
« Last Edit: October 10, 2013, 07:42:04 am by CherokeeKC »
Aim Small...Hit Small

Offline stickbender

  • Member
  • Posts: 3,828
Re: Case skinned fox hide quiver help
« Reply #1 on: September 25, 2013, 04:24:34 pm »

     Just turn it inside out to sew it on. ;)

                                                           Wayne

Offline half eye

  • Member
  • Posts: 3,300
Re: Case skinned fox hide quiver help
« Reply #2 on: September 25, 2013, 09:48:23 pm »
Just finished a Grey Fox (cased) as an example of an everyday hunting quiver. It's for the Odawa and their elders say it's a very fine example of the type that they used. Will email or post some photo's if they will help you out.

PS: there is no liner and no stiffening rods in these but they look real good (in my opinion)
rich

Offline half eye

  • Member
  • Posts: 3,300
Re: Case skinned fox hide quiver help
« Reply #3 on: September 26, 2013, 02:36:21 pm »
KC,
    Here's a couple pics of the grey fox  I just finished. There is no stiffener and no liner, FYI
the strap (bandolier) is braided moose leather and this is how I attach it.

cut a 2 to 3 foot leather thong between 1/4 and 1/2 inch wide, and fold it in half

cut two slits in the bandolier one above the other where you want to attach it, and one slit in the quiver where the attachment point will be (through both sides) if you have a stiffener then cut the quiver slit just below the stick

(for  a quiver with the bandolier outside the quiver....exposed not hidden) take the thong at the middle and push it through the top most hole in the bandolier, pass out the back and then through the quiver and then back through the bandolier at the lowest slit.

Pass the long ends through the small loop in the thong and pull up snug. The hanging thong ends act as tie downs if ya need to carry something else ( a bow without a sock, or tomahawk, spear etc)

If you need to "re-size" just cut 2 more slits in the bandolier where-ever needed and re-tie the loop.

 hope that helps....if any questions, happy to help you out.
rich
 

Offline half eye

  • Member
  • Posts: 3,300
Re: Case skinned fox hide quiver help
« Reply #4 on: September 26, 2013, 02:38:53 pm »
here is the close-up I forgot

Offline CherokeeKC

  • Member
  • Posts: 574
  • PM108323
Re: Case skinned fox hide quiver help
« Reply #5 on: September 27, 2013, 10:16:19 pm »
Thanks guys!  I should have pics up in a couple days of my quiver.
Aim Small...Hit Small

Offline Buckeye Guy

  • Member
  • Posts: 3,033
Re: Case skinned fox hide quiver help
« Reply #6 on: October 08, 2013, 04:16:11 pm »
Rich
Thanks for sharing !
We like seeing your goodies !
Guy Dasher
The Marshall Primitive Archery Rendezvous
Primitive Archery Society
Having  fun
To God be the glory !

Offline RyanR

  • Member
  • Posts: 833
Re: Case skinned fox hide quiver help
« Reply #7 on: October 08, 2013, 10:48:14 pm »
I have a real nice one that was given to me. It has an insert in it and the arrows go in its mouth.  It is getting late right now but if you want some pictures send me a PM and I will post them tomorrow.

Offline CherokeeKC

  • Member
  • Posts: 574
  • PM108323
Re: Case skinned fox hide quiver help
« Reply #8 on: October 09, 2013, 09:43:19 pm »
Here is my fox hide quiver.  I have a cane stiffener running through the thongs that tie on the straps.  The strap is made from braintan buckskin I cut myself and braided.  Thanks for all the help guys!





Aim Small...Hit Small

Offline half eye

  • Member
  • Posts: 3,300
Re: Case skinned fox hide quiver help
« Reply #9 on: October 09, 2013, 09:55:14 pm »
very nicely done, good lookin quiver
rich

Offline CherokeeKC

  • Member
  • Posts: 574
  • PM108323
Re: Pics of finished fox quiver added!
« Reply #10 on: October 10, 2013, 08:04:51 pm »
Thanks half eye and thanks for your help with attaching the strap to the hide!
Aim Small...Hit Small

Offline 4dog

  • Member
  • Posts: 1,610
Re: Pics of finished fox quiver added!
« Reply #11 on: October 23, 2013, 03:28:47 pm »
nice quivers!!
"SET" is always there !!!

Offline CherokeeKC

  • Member
  • Posts: 574
  • PM108323
Re: Pics of finished fox quiver added!
« Reply #12 on: October 24, 2013, 08:27:44 am »
Thanks 4dog!
Aim Small...Hit Small

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 31,904
  • if you have to ask you wouldn't understand ,Tenn.
Re: Pics of finished fox quiver added!
« Reply #13 on: October 24, 2013, 08:56:02 am »
Beautiful quiver,got to love that. :)
 Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Pics of finished fox quiver added!
« Reply #14 on: October 25, 2013, 04:30:58 pm »
  I like them hidden but I just carved HUNTINFOOL one out of Osage that had a cooperhead head on it. I think he's useing it on a otter skin quiver.
  I carved it with a rasp,dimeral and sand paper.
  I did'nt take a pic but maybe HUNTINFOOL will see this and post a pic.

  Those are beautiful quivers.
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING