Author Topic: Stingray grip teaser  (Read 6052 times)

0 Members and 1 Guest are viewing this topic.

Offline juniper junkie

  • Member
  • Posts: 714
Re: Stingray grip teaser
« Reply #15 on: September 16, 2013, 10:58:03 am »
very nice touch, love the pattern

Offline adb

  • Member
  • Posts: 5,339
Re: Stingray grip teaser
« Reply #16 on: September 16, 2013, 11:00:33 am »
I've seen those at Tandy and thought about it, it looks great!

Yup... that's where they came from. Buy the smaller skins. The nodes are smaller, they look better on the grip, they're easier to cut, and they're a bit cheaper. But, they aren't cheap! $25 a pop, and you get 1 grip!

Offline adb

  • Member
  • Posts: 5,339
Re: Stingray grip teaser
« Reply #17 on: September 16, 2013, 11:01:57 am »
Sorry I didn't get any really good FD pics. I was busy and my wife was taking the pics. I think everyone gets the idea though!

Offline lesken2011

  • Member
  • Posts: 2,063
  • Kenny
Re: Stingray grip teaser
« Reply #18 on: September 16, 2013, 05:48:28 pm »
Those turned out sweet, Adam!!
For by grace you have been saved through faith, and that not of yourselves; it is the gift of God, not of works, lest anyone should boast.

Ephesians 2:8-9

Kenny from Mississippi, USA

Offline Gus

  • Member
  • Posts: 1,829
  • It's Time To Make Some Shavings!
Re: Stingray grip teaser
« Reply #19 on: September 16, 2013, 05:56:43 pm »
Wait a Second!

Is it Legal to use Belt Sanders on this Site?!  :)

Love the Stingaree Grips...
I have been studying some Stingray hides from Tandy.
They are some Bloody Tough Stuff.
How did you punch your holes for lacing or sewing?
I have about decided to use my Drill Press...
My brand new leather punch won't get the job done.

-gus
"I taught him archery everyday, and when he got good at it he throw an arrow at me."

Conroe, TX

Offline adb

  • Member
  • Posts: 5,339
Re: Stingray grip teaser
« Reply #20 on: September 16, 2013, 06:00:12 pm »
I didn't punch holes or lace the grips. I skived the edges and did a simple overlap on the back side, holding the grip in place with contact cement. You're right, bloody near impossible to punch holes in that stuff.

Offline Gus

  • Member
  • Posts: 1,829
  • It's Time To Make Some Shavings!
Re: Stingray grip teaser
« Reply #21 on: September 16, 2013, 06:11:06 pm »
Ah, cool idea.

I'm definitely gonna try drilling a piece for lacing...

:)

-gus
"I taught him archery everyday, and when he got good at it he throw an arrow at me."

Conroe, TX

Offline adb

  • Member
  • Posts: 5,339
Re: Stingray grip teaser
« Reply #22 on: September 16, 2013, 07:33:14 pm »
Ah, cool idea.

I'm definitely gonna try drilling a piece for lacing...

:)

-gus

I tried drilling a piece, but it's like trying to drill a hole through a piece of cloth. It just wound around the drill bit and ruined the piece I was experimenting on.

Offline adb

  • Member
  • Posts: 5,339
Re: Stingray grip teaser
« Reply #23 on: September 16, 2013, 07:37:50 pm »
Those turned out sweet, Adam!!

Thanks!

Everyone (especially me) was thrilled with how the bows turned out. No major issues with tillering, and everything went pretty smooth. I'm only set up to do one-on-ones in my shop, but they knew that coming in, and there wasn't too much waiting around actually. I really enjoy teaching people to make bows. The look on their face the first time they shoot their new bows was priceless!
« Last Edit: September 16, 2013, 08:16:32 pm by adb »

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Stingray grip teaser
« Reply #24 on: September 16, 2013, 09:37:28 pm »
Ya, apparently you teach a good class, those tillers are nailed. Nice.
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline Carson (CMB)

  • Member
  • Posts: 2,319
Re: Stingray grip teaser
« Reply #25 on: September 16, 2013, 11:18:52 pm »
Mesmerizing pattern in those skins!

Nice shop too!
"The bow is the old first lyre,
the mono chord, the initial rune of fine art
The humanities grew out from archery as a flower from a seed
No sooner did the soft, sweet note of the bow-string charm the ear of genius than music was born, and from music came poetry and painting and..." Maurice Thompso

Offline adb

  • Member
  • Posts: 5,339
Re: Stingray grip teaser
« Reply #26 on: September 17, 2013, 02:03:16 am »
Ya, apparently you teach a good class, those tillers are nailed. Nice.

Thank you. Teaching others to make a bow is very satisfying work.

Offline adb

  • Member
  • Posts: 5,339
Re: Stingray grip teaser
« Reply #27 on: September 17, 2013, 02:05:41 am »
Mesmerizing pattern in those skins!

Nice shop too!

I guess you probably guessed my other passion is Ducati motorcycles. 3 so far (well, 2 are mine and one is my wife's). This other hobby is a bit more expensive and shows very little monetary return on investment. Grin factor is pretty big, however!

Offline skarhand

  • Member
  • Posts: 180
Re: Stingray grip teaser
« Reply #28 on: September 17, 2013, 12:07:39 pm »
That is awesome! The stingray grip is amazing. I am torn between wrapped and unwrapped handles, lol. On one hand the wood is so beautiful, but on the other a nice grip can be such a great addition.

Offline simson

  • Member
  • Posts: 2,310
  • stonehill-primitive-bows
    • stonehill-primitive-bows
Re: Stingray grip teaser
« Reply #29 on: September 17, 2013, 01:55:04 pm »
Come on adb, let's see that baby!
The grip is top notch - were is the bow?
Looks like it was a great fun in a well sorted shop.
Riding a duc is a dream of mine, perhaps some day ...
Simon
Bavaria, Germany