« previous next »
Pages: [1] 2

Author Topic: I'm not really sure how I managed to do this...;D  (Read 4039 times)

0 Members and 2 Guests are viewing this topic.

Offline AH

  • Member
  • Posts: 244
I'm not really sure how I managed to do this...;D
« on: June 12, 2013, 12:27:04 am »
 Well, it was an experiment.
I had this 3/4" by 3/4"/46" board sitting in the corner of the shop. I decided to do something with it--so I made a kid's molly bow! ;D
it's 24 lbs @ 25" but....this is the special part.
That unfletched arrow shaft with the bodkin point is 32" from the nock to the base of the bodkin.
And somehow I am able to draw the bow all the way to 32 without breaking it..!!?? :o
the levers are both 6.5", and the handle area is 5" stiff.
it's great fun shooting that unfletched 1/4 lb shaft off this bow and watching it fly in this great arc...I am drawing it 32" and shooting at almost a 30 degree angle to hit the mark at 20 yards!! ;D
Logged

Offline AH

  • Member
  • Posts: 244
Re: I'm not really sure how I managed to do this...;D
« Reply #1 on: June 12, 2013, 12:28:12 am »
forgot to mention--this bow is maple.
Logged

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: I'm not really sure how I managed to do this...;D
« Reply #2 on: June 12, 2013, 12:47:34 am »
Sweet, tiller looks great to me! Cool bow! I might of missed it, but what wood is it?
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline Zion

  • Member
  • Posts: 783
  • The blacksmith's mare walks barefoot
Re: I'm not really sure how I managed to do this...;D
« Reply #3 on: June 12, 2013, 12:58:06 am »
Nice bow, great bend on it lol. it probably survived because of the low poundage.
Logged
The secret of life is learning to make your own luck.

Offline AH

  • Member
  • Posts: 244
Re: I'm not really sure how I managed to do this...;D
« Reply #4 on: June 12, 2013, 01:32:11 am »
Quote from: Zion on June 12, 2013, 12:58:06 am
Nice bow, great bend on it lol. it probably survived because of the low poundage.
yeah, that's what I was thinking. it was my first molly though, so I made it lighter, and it's lighter than I wanted it to be also...cause dont we all know how hard it is to tiller a kid's bow...you fart and the tiller changes. I got so caught up in trying to perfect the tiller that I didn't notice the weight had dropped probably 15 pounds at least. ;D
Logged

Offline Hrothgar

  • Member
  • Posts: 1,477
Re: I'm not really sure how I managed to do this...;D
« Reply #5 on: June 12, 2013, 02:35:43 am »
It may be low weight, but that's a picture perfect tiller!
Logged
" To be, or not to be"...decisions, decisions, decisions.

Offline soy

  • Member
  • Posts: 2,897
  • pm106221
Re: I'm not really sure how I managed to do this...;D
« Reply #6 on: June 12, 2013, 03:21:40 am »
 :o
Logged
Is this bow making a sickness? or the cure...

Offline BowSlayer

  • Member
  • Posts: 644
Re: I'm not really sure how I managed to do this...;D
« Reply #7 on: June 12, 2013, 04:33:35 am »
Im liking this one. Awsome tiller,  Im going to make a molle in the near future....hopefully :P
Logged
London, England.

45#@28"

blackhawk

  • Guest
Re: I'm not really sure how I managed to do this...;D
« Reply #8 on: June 12, 2013, 07:21:31 am »
Cool!!!!  :)
Logged

Offline lesken2011

  • Member
  • Posts: 2,063
  • Kenny
Re: I'm not really sure how I managed to do this...;D
« Reply #9 on: June 12, 2013, 09:43:50 am »
All I can say is you definitely nailed the tiller and are getting the most out of that piece of wood!!
Logged
For by grace you have been saved through faith, and that not of yourselves; it is the gift of God, not of works, lest anyone should boast.

Ephesians 2:8-9

Kenny from Mississippi, USA

Offline BowSlayer

  • Member
  • Posts: 644
Re: I'm not really sure how I managed to do this...;D
« Reply #10 on: June 12, 2013, 10:24:02 am »
Did you glue on a risor? And are the tips and handle measurements including the fades? Thanks.
Logged
London, England.

45#@28"

Offline Buffalogobbler

  • Member
  • Posts: 1,083
Re: I'm not really sure how I managed to do this...;D
« Reply #11 on: June 12, 2013, 10:29:08 am »
Nice looking bow, I'd love to see a video of that 1/4 lb shaft arcing towards the target, it must be cool.

Kevin
Logged
Beer is living proof that god loves us and wants us to be happy-Ben Franklin

Offline Thesquirrelslinger

  • Member
  • Posts: 1,245
Re: I'm not really sure how I managed to do this...;D
« Reply #12 on: June 12, 2013, 10:51:30 am »
Wow. Wow. Wow. Very purty... HOW IS IT SURVIVING THAT DRAW?
Low weight can break the 1/2 rule?
Logged
"Insanity is doing the same thing over and over again and expecting different results"

Offline AH

  • Member
  • Posts: 244
Re: I'm not really sure how I managed to do this...;D
« Reply #13 on: June 12, 2013, 01:50:20 pm »
Quote from: BowSlayer on June 12, 2013, 10:24:02 am
Did you glue on a risor? And are the tips and handle measurements including the fades? Thanks.
nope, it's a selfbow.
and yes measuerments include fades
« Last Edit: June 12, 2013, 02:08:31 pm by Livefortheoutdoors »
Logged

Offline AH

  • Member
  • Posts: 244
Re: I'm not really sure how I managed to do this...;D
« Reply #14 on: June 12, 2013, 01:52:20 pm »
Quote from: Thesquirrelslinger on June 12, 2013, 10:51:30 am
Wow. Wow. Wow. Very purty... HOW IS IT SURVIVING THAT DRAW?
Low weight can break the 1/2 rule?
I dunno. Like I said, I'm not really sure how I managed to do this. I was very surprised when I got it all the way to 28" in the first place because the center of the board had a lot of violation at a grain swirl--that's why I had to make such a large stiff handle.
Logged
Pages: [1] 2
« previous next »