Here is an osage warbow I recently made. I wasn't sure it was gonna make "warbow" status at first, and I thought I was gonna end up with a 80# longbow, which is actually perfectly fine with me. It came out 90# @ 32" though, so I guess I should post this bow in the warbow forum instead of the normal bows forum. It is actually a nice weight for me. It is 69 1/4" nock to nock, I forget how much set, but not too much. You can see in the pictures it has a pretty straight unbraced profile, it is hard to measure bows like this because of all the knots. There was a good amount of kinks and bumps in this stave, I love staves like that.
![](http://i1203.photobucket.com/albums/bb392/toomany7/Osage%20Warbow%2090lbs%20at%2032%20inches/DSCN1768.jpg)
![](http://i1203.photobucket.com/albums/bb392/toomany7/Osage%20Warbow%2090lbs%20at%2032%20inches/DSCN1789.jpg)
![](http://i1203.photobucket.com/albums/bb392/toomany7/Osage%20Warbow%2090lbs%20at%2032%20inches/DSCN1801.jpg)
![](http://i1203.photobucket.com/albums/bb392/toomany7/Osage%20Warbow%2090lbs%20at%2032%20inches/DSCN1794.jpg)
![](http://i1203.photobucket.com/albums/bb392/toomany7/Osage%20Warbow%2090lbs%20at%2032%20inches/DSCN1779.jpg)
![](http://i1203.photobucket.com/albums/bb392/toomany7/Osage%20Warbow%2090lbs%20at%2032%20inches/DSCN1774.jpg)
![](http://i1203.photobucket.com/albums/bb392/toomany7/Osage%20Warbow%2090lbs%20at%2032%20inches/DSCN1805.jpg)
Had to plug a knot:
![](http://i1203.photobucket.com/albums/bb392/toomany7/Osage%20Warbow%2090lbs%20at%2032%20inches/DSCN1778.jpg)
Unbraced:
![](http://i1203.photobucket.com/albums/bb392/toomany7/Osage%20Warbow%2090lbs%20at%2032%20inches/DSCN1791.jpg)
Braced:
![](http://i1203.photobucket.com/albums/bb392/toomany7/Osage%20Warbow%2090lbs%20at%2032%20inches/DSCN1798.jpg)
Here is about 28" or 29" (I am guessing by the length of the 30" arrow shaft) before I put nocks on it:
![](http://i1203.photobucket.com/albums/bb392/toomany7/Osage%20Warbow%2090lbs%20at%2032%20inches/DSCN1718.jpg)
![](http://i1203.photobucket.com/albums/bb392/toomany7/Osage%20Warbow%2090lbs%20at%2032%20inches/DSCN1718-1.jpg)
Here it is on my (fancy new) tiller tree at 32":
![](http://i1203.photobucket.com/albums/bb392/toomany7/Osage%20Warbow%2090lbs%20at%2032%20inches/tiller2.png)
...And here is a link to the video I took of me drawing it on the tiller to 32" that I took the above picture from:
http://www.youtube.com/watch?v=tPMUS6iZktYI am guessing the tiller could be better in spots, but I had a couple deflexes here and there which make it look a bit hingy and weird. Overall I figure I am gonna call it a bow and be done with it,
![Grin ;D](http://www.primitivearcher.com/smf/Smileys/default/grin.gif)
.
EDIT: Fixed the pictures.