Author Topic: Have you ever chased a ring on Hickory?  (Read 3302 times)

0 Members and 1 Guest are viewing this topic.

Offline Dean Marlow

  • Member
  • Posts: 531
Have you ever chased a ring on Hickory?
« on: April 04, 2013, 07:48:07 pm »
Went and cut a good sized Hickory a week ago and started splitting it out a couple of days ago. It was a large diameter Hickory and the sap wood would run down into the log a good 3" or more in the log. So I am splitting out some belly splits but it isn't following a growth ring. These are the straightest and cleanest Hickory staves and want to try and do something with the belly splits. Can folowing a ring be done? Dean

Offline Thesquirrelslinger

  • Member
  • Posts: 1,245
Re: Have you ever chased a ring on Hickory?
« Reply #1 on: April 04, 2013, 07:57:50 pm »
This is hickory, right? I do not think you need to chase a ring.
Ask someone more experianced, but heck, its hickory.
"Insanity is doing the same thing over and over again and expecting different results"

Offline RyanY

  • Member
  • Posts: 1,999
Re: Have you ever chased a ring on Hickory?
« Reply #2 on: April 04, 2013, 07:59:10 pm »
Yes! Many many times!

Offline DavidV

  • Member
  • Posts: 472
Re: Have you ever chased a ring on Hickory?
« Reply #3 on: April 04, 2013, 08:00:44 pm »
Yeah you can follow a ring on the belly splits. Do it in good outdoor lighting so you can see the rings.
Springfield, MO

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: Have you ever chased a ring on Hickory?
« Reply #4 on: April 04, 2013, 08:08:26 pm »
Yeah Dean I've done it a few times due to borer damage. Slow and a pain in the @$$ but doable with patience and good lighting.
I ain't broke but I'm badly bent.

Offline Dean Marlow

  • Member
  • Posts: 531
Re: Have you ever chased a ring on Hickory?
« Reply #5 on: April 04, 2013, 08:31:26 pm »
Alright then I will give them a coat of sealer and will give them a try one of these days.

Offline Squirrelslayer

  • Member
  • Posts: 529
Re: Have you ever chased a ring on Hickory?
« Reply #6 on: April 04, 2013, 08:48:28 pm »
Hmm is it just me or is everyone makin hickory bows?  I know this might not apply to your situation but for my hickory bow I havnt chased a ring.  But im not makin it from a stave im making it from a "board" but im a novice so im sure someone with more experience can shed some light on the subject.  SS
WARNING: posts may contain nuts.

http://squirrelslayers.forumshome.com/ - check out my forum, and if you like what you see... Join!

also on YouTube

https://www.youtube.com/user/cj822100?feature=mhee

Offline twisted hickory

  • Member
  • Posts: 375
Re: Have you ever chased a ring on Hickory?
« Reply #7 on: April 04, 2013, 10:01:41 pm »
Made a kids bow by chasing a ring on some hickory heart wood and I won't do it again. It was a pain.
Bow shoots great.
Greg

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Have you ever chased a ring on Hickory?
« Reply #8 on: April 04, 2013, 10:17:20 pm »
Yes, the rings are small though. It takes patience. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Have you ever chased a ring on Hickory?
« Reply #9 on: April 05, 2013, 12:40:26 am »
Those rings are gigantic compared to any hickory I have seen here. Chase a ring.  ;)
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline soy

  • Member
  • Posts: 2,897
  • pm106221
Re: Have you ever chased a ring on Hickory?
« Reply #10 on: April 05, 2013, 01:02:03 am »
piece of cake! the ones closer to the bark are harder than the ones down deeper in my experience ;)
Is this bow making a sickness? or the cure...

Offline hedgeapple

  • Member
  • Posts: 1,835
Re: Have you ever chased a ring on Hickory?
« Reply #11 on: April 05, 2013, 01:07:41 am »
The first ring I ever chase was on a hickory.  I didn't know any better. I was just cleaning up the back of the bow.  About half way through, I realized I was feeling/hearing the crushing sound of ring chasing as described on this forum.  So I finished the doing the rest of the bow.  Yeah, it did take over 2 hours but it was fun back then.  :)
Dave   Richmond, KY
26" draw