Author Topic: 56" sinew backed osage static recurve...the beginnings!  (Read 77281 times)

0 Members and 3 Guests are viewing this topic.

Offline TRACY

  • Member
  • Posts: 4,523
Re: 56" sinew backed osage static recurve...the beginnings!
« Reply #60 on: June 02, 2013, 08:29:01 am »
Very nice project Pat. The ability to put such an aggressive bend into a bow is very cool. Sinew is only going to add flames to the arrow as its launched >:D . You have my attention.

Tracy
It is what it is - make the most of it!    PN500956

Offline MWirwicki

  • Member
  • Posts: 2,234
  • The wood speaks to you; Listen with your eyes. GSD
Re: 56" sinew backed osage static recurve...the beginnings!
« Reply #61 on: June 02, 2013, 09:24:40 am »
Coming along nicely, Pat!  I would say she's ready for sinew.  Can't wait....
Matt Wirwicki
Owosso, MI

Offline lesken2011

  • Member
  • Posts: 2,063
  • Kenny
Re: 56" sinew backed osage static recurve...the beginnings!
« Reply #62 on: June 02, 2013, 09:27:17 am »
Nice job, Pat. I just caught back up on this build. I can't wait to see her finished up.
For by grace you have been saved through faith, and that not of yourselves; it is the gift of God, not of works, lest anyone should boast.

Ephesians 2:8-9

Kenny from Mississippi, USA

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: 56" sinew backed osage static recurve...the beginnings!
« Reply #63 on: June 02, 2013, 01:32:18 pm »
Those were my thoughts too Matt.
Should I reduce some weight before sinewing? She is at 60#@20" now and I am shooting for
50#--55#@26" after the sinew cures.
  Thanks guys. Things are gonna slow down now with the addition of the sinew but I'll post more with each step.  ;)
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline ionicmuffin

  • Member
  • Posts: 1,787
Re: 56" sinew backed osage static recurve...the beginnings!
« Reply #64 on: June 02, 2013, 01:45:46 pm »
well, considering that your weight is 60@20 and you said 80 at 26 right? well sinew adds like 10 correct? so its going to be a beast! i would think you would want to reduce it, but ive never done a bow like this, just speculating on what ive seen and heard from others.
Amo innectis arcus- I love crafting bows (latin)

Offline simson

  • Member
  • Posts: 2,310
  • stonehill-primitive-bows
    • stonehill-primitive-bows
Re: 56" sinew backed osage static recurve...the beginnings!
« Reply #65 on: June 02, 2013, 04:34:23 pm »
Comes along very good, great work!
Can't wait to see more, esp. sinew job
Simon
Bavaria, Germany

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: 56" sinew backed osage static recurve...the beginnings!
« Reply #66 on: June 03, 2013, 12:05:54 am »
Muffin, I will reduce the weight to 55#@26" after the sinew has cured. The reason for not tillering the bow out more is to prevent as much compression stress as possible before adding the sinew.
 Thanks Simon. I'm looking forward to it all too. I've thought about this bow for a long time and finally got the courage(and proper stave) to do it. 
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Parnell

  • Member
  • Posts: 5,556
Re: 56" sinew backed osage static recurve...the beginnings!
« Reply #67 on: June 03, 2013, 09:14:54 am »
Lookin real good Pat.  Looking forward to seeing her progress.
1’—>1’

Offline MWirwicki

  • Member
  • Posts: 2,234
  • The wood speaks to you; Listen with your eyes. GSD
Re: 56" sinew backed osage static recurve...the beginnings!
« Reply #68 on: June 03, 2013, 03:28:57 pm »
Pat:  I would sinew it.  Reduce after sinewing.  You will likely start (after curing) with an even tiller which will make it easier to reduce.
Matt Wirwicki
Owosso, MI

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: 56" sinew backed osage static recurve...the beginnings!
« Reply #69 on: June 03, 2013, 03:33:30 pm »
Thanks Matt.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: 56" sinew backed osage static recurve...the beginnings!
« Reply #70 on: June 04, 2013, 12:07:22 am »
Now I have to clean off my upstair work table where I'll sinew the bow. At the rate I'm going that alone will take a month.  ::)   ;D
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Little John

  • Member
  • Posts: 1,709
Re: 56" sinew backed osage static recurve...the beginnings!
« Reply #71 on: June 04, 2013, 01:17:02 am »
Cool project Pat, anxious to see  more, would a belly toasting be a benefit, keep the sinue on a short bow from over powering the belly? Good luck and am sure it will be to die for.    Kenneth
May all of your moments afield with bow in hand please and satisfy you.            G. Fred Asbell

Offline Joec123able

  • Member
  • Posts: 1,769
Re: 56" sinew backed osage static recurve...the beginnings!
« Reply #72 on: June 04, 2013, 03:47:44 am »
Cool project Pat, anxious to see  more, would a belly toasting be a benefit, keep the sinue on a short bow from over powering the belly? Good luck and am sure it will be to die for.    Kenneth

A belly toasting is not nessecary with Osage it's already incredibly strong under compression but i don't think you have anything to lose from toasting it
I like osage

Offline RidgeRunner

  • Member
  • Posts: 1,153
Re: 56" sinew backed osage static recurve...the beginnings!
« Reply #73 on: June 04, 2013, 09:54:37 am »
Seeing that this is a Static Recurve how far down the limbs are you going with the sinew?

David
David Key / N.W. Alabama

Offline criveraville

  • Member
  • Posts: 3,210
  • Psalm 127:4
Re: 56" sinew backed osage static recurve...the beginnings!
« Reply #74 on: June 04, 2013, 10:03:03 am »
Wow Pat really nice bow.   ;)

Cipriano
I was HECHO EN MEXICO, but assembled in Texas and I'm Texican as the day is long...  Psalm 127:4 As arrows are in the hand of a mighty man; so are children of the youth.