« previous next »
Pages: [1]

Author Topic: Aniline Dye  (Read 1474 times)

0 Members and 1 Guest are viewing this topic.

Offline Orangeman89

  • Member
  • Posts: 24
Aniline Dye
« on: February 20, 2013, 08:18:33 pm »
Hey Guys,

I am about to put a finish on my first osage flat bow and wanted to dye it with aniline dye.  What do you guys/gals use to seal the bow after applying dye?  I was thinking of using true oil and wondered if that would work well.  Thanks for any input. 
Mark
Logged

Offline twisted hickory

  • Member
  • Posts: 375
Re: Aniline Dye
« Reply #1 on: February 20, 2013, 10:16:42 pm »
Good question Mark,
I will be watching as I am going to do a steel wool, coffee, vinager dye and I wonder if just a few coats of spar varnish will do the trick. I would guess it would as well as aniline. I haven't used aniline though.
Greg
Logged

Offline Newindian

  • Member
  • Posts: 734
Re: Aniline Dye
« Reply #2 on: February 20, 2013, 10:27:21 pm »
I don't think many have experience with it you might well be the first, most people on here kinda like the color of the yeller stuff
Logged
I like free stuff.

Offline Will H

  • Member
  • Posts: 2,120
Re: Aniline Dye
« Reply #3 on: February 20, 2013, 11:01:56 pm »
I've done it a few times. I've used poly and spar urathane over dye with no problems at all.
Logged
Proud Member of Twin Oaks Bowhunters
           Clarksville, Tennessee

   "Middle Tennessee is the place to be"

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: Aniline Dye
« Reply #4 on: February 20, 2013, 11:04:14 pm »
I've used feibings leather dye on osage and white woods with tru oil with good results, just make sure the dye has had plenty of time to dry before top coating,
Logged
I ain't broke but I'm badly bent.

blackhawk

  • Guest
Re: Aniline Dye
« Reply #5 on: February 20, 2013, 11:09:59 pm »
Tru oil will work just fine mark...just do like Greg mentions and make sure its good n dry before you start sealing
Logged

Offline Roy

  • Member
  • Posts: 1,079
Re: Aniline Dye
« Reply #6 on: February 20, 2013, 11:34:10 pm »
Tung Oil will work also.
Logged

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Aniline Dye
« Reply #7 on: February 20, 2013, 11:46:58 pm »
I have used tru-oil over RIT dye with good results.
Logged
I started out with nothin' and I still got most of it left

Offline Orangeman89

  • Member
  • Posts: 24
Re: Aniline Dye
« Reply #8 on: February 20, 2013, 11:59:10 pm »
thanks for the replies.  I dyed the bow tonight and will wait 2 days before applying the tru oil. 
Mark
Logged

Offline lesken2011

  • Member
  • Posts: 2,063
  • Kenny
Re: Aniline Dye
« Reply #9 on: February 21, 2013, 09:29:24 am »
Be careful with alcohol based dyes and shellac. It can re-activate the dye and cause runs. Don't ask me how I know! ::)
Logged
For by grace you have been saved through faith, and that not of yourselves; it is the gift of God, not of works, lest anyone should boast.

Ephesians 2:8-9

Kenny from Mississippi, USA
Pages: [1]
« previous next »