« previous next »
Pages: 1 ... 11 12 [13] 14 15 ... 18

Author Topic: Can't get started in making a bow  (Read 43952 times)

0 Members and 2 Guests are viewing this topic.

Offline Bitterguy

  • Member
  • Posts: 257
Re: Can't get started in making a bow
« Reply #180 on: March 04, 2013, 09:41:43 pm »
I'm setting my bow up in the vice right before the wood I have to remove and I scrape wood off with one of the corners, am I not pushing hard enough?
Logged
Repetition is key.
Repetition is key.
Repetition is key.
Repetition is key.
If you're not getting better, you're getting worse.

Offline Bitterguy

  • Member
  • Posts: 257
Re: Can't get started in making a bow
« Reply #181 on: March 04, 2013, 10:59:01 pm »
Well I spent some time fixing up my cabinet scraper technique and here she is with some more work, still at 18"
« Last Edit: March 04, 2013, 11:02:10 pm by Bitterguy »
Logged
Repetition is key.
Repetition is key.
Repetition is key.
Repetition is key.
If you're not getting better, you're getting worse.

Offline JW_Halverson

  • Member
  • Posts: 11,882
Re: Can't get started in making a bow
« Reply #182 on: March 04, 2013, 11:11:21 pm »
Seeing some improvement.  Leave the handle section along again and go take a bit more off the outer thirds.  Go easy, you are stalking the tiller.  She's been hunted hard for a long time and is pretty skittish.  Take your time.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Can't get started in making a bow
« Reply #183 on: March 05, 2013, 11:52:47 am »
Your left limb is good, your right is stiff midway. Work that area, brace the bow at 5 1/2" and draw it back to 20" shooting it 10-12 times at that length. Then tree and snap a pic.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Bitterguy

  • Member
  • Posts: 257
Re: Can't get started in making a bow
« Reply #184 on: March 05, 2013, 12:03:15 pm »
Shooting or exercising it?
Logged
Repetition is key.
Repetition is key.
Repetition is key.
Repetition is key.
If you're not getting better, you're getting worse.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Can't get started in making a bow
« Reply #185 on: March 05, 2013, 12:05:30 pm »
Scrape the right side midway, brace it to 5 1/2 - 5 3/4" and shoot it at a 20" draw several times, at least 10-15. The tree it again and snap a pic.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Bitterguy

  • Member
  • Posts: 257
Re: Can't get started in making a bow
« Reply #186 on: March 05, 2013, 12:19:41 pm »
My fletching jig should come sometime this week(got another paycheck so I splugered a bit), how did you mark the spine and how do I orient the feathers/nock according to the spine?
Logged
Repetition is key.
Repetition is key.
Repetition is key.
Repetition is key.
If you're not getting better, you're getting worse.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Can't get started in making a bow
« Reply #187 on: March 05, 2013, 12:21:12 pm »
You should start another thread in the arrows section for this. It would be easier to seperate info for other users.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline bigpapa

  • Member
  • Posts: 93
  • all the senorita's call me bigpapa
Re: Can't get started in making a bow
« Reply #188 on: March 05, 2013, 12:31:34 pm »
Looks like someone better start practicing making arrows. Lol!! Lookin good!
Logged
Our only limitations in life are the ones we put on ourselves!
Dream your dreams, and fly like the eagles!

Offline JW_Halverson

  • Member
  • Posts: 11,882
Re: Can't get started in making a bow
« Reply #189 on: March 05, 2013, 06:11:10 pm »
Quote from: Bitterguy on March 05, 2013, 12:19:41 pm
My fletching jig should come sometime this week(got another paycheck so I splugered a bit), how did you mark the spine and how do I orient the feathers/nock according to the spine?

Splugering is illegal in South Dakota and morally reprehensible.  Your kind doesn't belong here.

On wood arrows, the spine is supposed to be measured so that you take advantage of the grain of the wood providing the most stiffness.  Look at the end cuts on the arrows and the grain should looklike roughly parallel lines.  The force applied to the arrow to get it to bend and measure spine stiffness is parallel to the grain.  So when you cut your nocks into the arrow, you should be cutting across the grain of the wood.  Since I make self nocks that's pretty easy to do.  With glued on nocks, you will have to figure out how to make sure the nock is perpendicular to the grain of the arrows.  Clear as mud?
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Bitterguy

  • Member
  • Posts: 257
Re: Can't get started in making a bow
« Reply #190 on: March 05, 2013, 06:32:17 pm »
Like this?
Logged
Repetition is key.
Repetition is key.
Repetition is key.
Repetition is key.
If you're not getting better, you're getting worse.

Offline JW_Halverson

  • Member
  • Posts: 11,882
Re: Can't get started in making a bow
« Reply #191 on: March 05, 2013, 06:34:04 pm »
Bingo!
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Bitterguy

  • Member
  • Posts: 257
Re: Can't get started in making a bow
« Reply #192 on: March 05, 2013, 06:45:59 pm »
Alright I got a nock with some Rico cement drieng and one of pearls cedar shaft, now before I go and order any tips off of 3river what else should I get from there, these shipping fees are killing me!
Logged
Repetition is key.
Repetition is key.
Repetition is key.
Repetition is key.
If you're not getting better, you're getting worse.

Stringman

  • Guest
Re: Can't get started in making a bow
« Reply #193 on: March 05, 2013, 06:52:39 pm »
Ha! Where to begin!

This has been a nice follow along guys! Thanks for taking the time PD (and the gang.)

Scott
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Can't get started in making a bow
« Reply #194 on: March 05, 2013, 06:56:32 pm »
Quote from: Bitterguy on March 05, 2013, 06:45:59 pm
Alright I got a nock with some Rico cement drieng and one of pearls cedar shaft, now before I go and order any tips off of 3river what else should I get from there, these shipping fees are killing me!

ya know if there's an archery shop around you can get all this stuff minus the shipping
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹
Pages: 1 ... 11 12 [13] 14 15 ... 18
« previous next »