« previous next »
Pages: 1 ... 9 10 [11] 12 13 ... 18

Author Topic: Can't get started in making a bow  (Read 46755 times)

0 Members and 1 Guest are viewing this topic.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Can't get started in making a bow
« Reply #150 on: February 24, 2013, 08:42:30 am »
Yup, those nocks are from me. They will work great with 11/32 shafts. The leather wrap handle is a breeze. We can burn that bridge when we get there.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Bitterguy

  • Member
  • Posts: 257
Re: Can't get started in making a bow
« Reply #151 on: February 24, 2013, 01:20:36 pm »
Do you have any plans for the fletching jig?
Logged
Repetition is key.
Repetition is key.
Repetition is key.
Repetition is key.
If you're not getting better, you're getting worse.

Offline bubby

  • Member
  • Posts: 11,054
Re: Can't get started in making a bow
« Reply #152 on: February 24, 2013, 03:31:32 pm »
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Bitterguy

  • Member
  • Posts: 257
Re: Can't get started in making a bow
« Reply #153 on: February 24, 2013, 06:47:34 pm »
Once i make one of those out of carboard what do i do? does it matter where i put the feathers? Do i glue them then wrap some string around them? And how do i go about putting on the nocks?
Logged
Repetition is key.
Repetition is key.
Repetition is key.
Repetition is key.
If you're not getting better, you're getting worse.

Offline Bitterguy

  • Member
  • Posts: 257
Re: Can't get started in making a bow
« Reply #154 on: February 25, 2013, 06:14:24 pm »
Alright! Kevin's cabinetnet scrapper came in (i take it I just drag one of the corners along the wood?) conveniently my spools for my final string came in too!
Logged
Repetition is key.
Repetition is key.
Repetition is key.
Repetition is key.
If you're not getting better, you're getting worse.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Can't get started in making a bow
« Reply #155 on: February 25, 2013, 06:50:01 pm »
Cool. You pull  or push it across the surface of the bow scraping wood away. Give it a few practice strokes.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Can't get started in making a bow
« Reply #156 on: February 25, 2013, 10:29:59 pm »
I went back and saw that you had sent him some plastic nocks.  I was decidedly dissappointed.  Not because they were plastic, but because they weren't self nocks.  I was dying to see how you had sent him a dozen self nocks! 

The reason I was so interested was that I used a Skilsaw to put a kerf on an elm log and put it in the wrong place.  If I could chop that kerf into small bits I could use them for pre-cut self nocks. 
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Can't get started in making a bow
« Reply #157 on: February 26, 2013, 09:30:30 am »
Get yourself a string made for it, 2" shorter than the bow.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Bitterguy

  • Member
  • Posts: 257
Re: Can't get started in making a bow
« Reply #158 on: February 26, 2013, 06:04:38 pm »
I take it i wont use that string until im ready for full brace?
Logged
Repetition is key.
Repetition is key.
Repetition is key.
Repetition is key.
If you're not getting better, you're getting worse.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Can't get started in making a bow
« Reply #159 on: February 26, 2013, 07:18:39 pm »
You will use it right away. At 2" short you can brace your bow now. Did you get a feel for how scrapers work? They dont need much downward pressure, not like a rasp. Its is meant to scrape thin curls of wood off gradual and clean.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Bitterguy

  • Member
  • Posts: 257
Re: Can't get started in making a bow
« Reply #160 on: February 26, 2013, 08:04:38 pm »
I already made another string for it that I'm just twisting up, I just ordered the extra spools cus I'm starting to run low on the spool I was using was running out. I'm startlinglyng to get a feel for the scraper.

I have a question about temprature and climate though, I keep my bow inside (usually warm and humid) but I work in my dad garage(cold and whatever the humidity is outside) will this effect my bow at all?
Logged
Repetition is key.
Repetition is key.
Repetition is key.
Repetition is key.
If you're not getting better, you're getting worse.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Can't get started in making a bow
« Reply #161 on: February 26, 2013, 09:05:07 pm »
Not now. It will once you learn alot more. Little things arent worth sweating at this point. Once you get a few bows to hold together a whirlwind of possibilities will follow. Humidity, mass weight, working limb ratio and so on. For now just learning to manipulate wood is a good starter.


You can brace your bow and keep keep tillering if you want to. Just give it 12-15 pulls to 15" in between scrapings.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Buckeye Guy

  • Member
  • Posts: 3,033
Re: Can't get started in making a bow
« Reply #162 on: February 26, 2013, 10:15:41 pm »
Chris
I am impressed with how you are handling this help along !!
Very good job !

JW if the selfnocks come installed , I'll take a hundred !

Keep up the good work Pearly!
Guy
Logged
Guy Dasher
The Marshall Primitive Archery Rendezvous
Primitive Archery Society
Having  fun
To God be the glory !

Offline Bitterguy

  • Member
  • Posts: 257
Re: Can't get started in making a bow
« Reply #163 on: February 26, 2013, 10:29:19 pm »
This is where it stands at a 3" brace 14" draw
Logged
Repetition is key.
Repetition is key.
Repetition is key.
Repetition is key.
If you're not getting better, you're getting worse.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Can't get started in making a bow
« Reply #164 on: February 27, 2013, 09:32:31 am »
Midway on both limbs needs to move more. Take 15-18 scrapes in the center 10" of each limb
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.
Pages: 1 ... 9 10 [11] 12 13 ... 18
« previous next »