Thanks guys, the next one may be covered with obsidian flakes.
The wood is ashe, 1 inch thick, but any hardwood will work for it. The board was 6 inches wide. I have walnut and cherry for the next two. As for dimensions, I hate to disappoint you. The best I can tell you is one inch thick, and 26 inches long. Actual measurements? I really didn't measure anything. I layed my old CVA muzzleloader on the board and traced around the stock. Then changed the angle of the butt to give it a little more of a dogleg look. I think the next one will be from an 8 inch board to get more angle on the stock.