« previous next »
Pages: [1] 2 3

Author Topic: Dean Torges Bowmaking Rasp UBR10  (Read 13303 times)

0 Members and 2 Guests are viewing this topic.

Offline Bert

  • Member
  • Posts: 49
Dean Torges Bowmaking Rasp UBR10
« on: May 21, 2012, 03:52:42 pm »
Heya fella's,

Searched the forum but didn't find any info on this tool.
I was wondering if anybody had expierence with this rasp:

I have my own tools, altough my rasp isn't really up to par.
Would spending 70$ on this one be a good buy ?
Logged

Offline Dazv

  • Member
  • Posts: 472
Re: Dean Torges Bowmaking Rasp UBR10
« Reply #1 on: May 21, 2012, 04:08:44 pm »
I'm sure that rasp would work very well but I find a cheap Shinto rasp works great aswell
Logged

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Dean Torges Bowmaking Rasp UBR10
« Reply #2 on: May 21, 2012, 04:13:52 pm »
BAHCO cabinet rasp for me, medium one side and like a file on t'other, brilliant.
Del
Logged
Health warning, these posts may contain traces of nut.

Offline Will H

  • Member
  • Posts: 2,120
Re: Dean Torges Bowmaking Rasp UBR10
« Reply #3 on: May 21, 2012, 05:35:51 pm »
I bet it's good but I prefer a Nicholson #49 and a #50 if you can swing it ;) if you just get one get the 49 :)
Logged
Proud Member of Twin Oaks Bowhunters
           Clarksville, Tennessee

   "Middle Tennessee is the place to be"

Offline Bert

  • Member
  • Posts: 49
Re: Dean Torges Bowmaking Rasp UBR10
« Reply #4 on: May 21, 2012, 05:44:05 pm »
the site says :
Quote
The UBR10 compares favorably to the 10" European rasps selling upwards of $90.00 on the fine side, and cuts as fast and smoother than a #49 Nicholson on the coarse side and without clogging.

and other 'good things' bout it. but then again, they are tying to sell it  ;)
Logged

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: Dean Torges Bowmaking Rasp UBR10
« Reply #5 on: May 21, 2012, 05:47:25 pm »
Shinto & Farriers rasp for me. I can get both for about half that cost.
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline stubshaft

  • Member
  • Posts: 25
Re: Dean Torges Bowmaking Rasp UBR10
« Reply #6 on: May 21, 2012, 07:11:52 pm »
Love my Nicholson #49.
Logged
If God didn't want man to eat animals, he wouldn't have made them out of MEAT!

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Dean Torges Bowmaking Rasp UBR10
« Reply #7 on: May 21, 2012, 07:17:10 pm »
I think it is a nicholson 49 with a forehandle.  $70 isnt a good buy. Buy two Nicholsons or three Shinto's. Try a Shinto and you will never be without one. No chattering on tips, fades or high spots.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline dmc

  • Member
  • Posts: 136
Re: Dean Torges Bowmaking Rasp UBR10
« Reply #8 on: May 21, 2012, 09:40:06 pm »
I've got Nickelson #49, and really like it. Bought a farriers rasp as well. That baby can hog off wood!
Logged
Carpe Diem- Seize the Day!!

Offline Fred Arnold

  • Member
  • Posts: 1,566
  • From up on Munson Creek
Re: Dean Torges Bowmaking Rasp UBR10
« Reply #9 on: May 21, 2012, 10:07:00 pm »
I purchased a new #49 and comparing it to the farriers rasp I own, the farriers rasp wins hands down. I've barely used the 49. I've thought about ordering the UBR10 but was waiting for someone with a lot of experience with one to chime in.
And the 49 sure does seem to clog up fast.
Logged
I found many years ago that it is much easier and more rewarding working with those that don't know anything than those that know it all.

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: Dean Torges Bowmaking Rasp UBR10
« Reply #10 on: May 21, 2012, 10:16:14 pm »
I would recommend the Shinto to any and all.
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline Badger

  • Member
  • Posts: 8,124
Re: Dean Torges Bowmaking Rasp UBR10
« Reply #11 on: May 21, 2012, 11:10:33 pm »
  I have the Torges Rasp, I liked it when it was new but felt it didn't maintain it's sharpness as long as it should have. Of course I have worn out about 20 ferriers rasps now so I am pretty hard on rasps. My go to for several years has been the nicholson 49, seems to hold up very well and do the job. I use it for some tillering and handle shaping but don't hog of wood with it.
Logged

Offline rkeltner

  • Member
  • Posts: 226
Re: Dean Torges Bowmaking Rasp UBR10
« Reply #12 on: May 21, 2012, 11:14:33 pm »
drop 20 bucks at your local farm supply for a farrier's rasp! i haven't found a more usefull file yet. (haven't tried the shinto, so i have no opinion on those)
Logged

Offline Fred Arnold

  • Member
  • Posts: 1,566
  • From up on Munson Creek
Re: Dean Torges Bowmaking Rasp UBR10
« Reply #13 on: May 21, 2012, 11:37:07 pm »
Have any of you tried to sharpen your old files and rasps. I did see where it could be done but the cost seemed prohibitive because of shipping costs both directions.
Not sure where I found this and it may well have been here. I tried the vinegar method and did notice an improvement but nothing compares to a new rasp. I had to copy and paste to bring it back up.
http://logancabinetshoppe.com/blog/2010/12/quick-tip-7/
Logged
I found many years ago that it is much easier and more rewarding working with those that don't know anything than those that know it all.

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Dean Torges Bowmaking Rasp UBR10
« Reply #14 on: May 22, 2012, 12:30:31 am »
I love my ferriors rasp for rapid wood removal.  One of these days I'm going to order a shinto to try out.  I don't think I would ever pay $70 for a rasp.

Badger:  I can see why you go through so many rasps.  You make like 2 bows every day  ;D  How is the bow building retirement going   ::) 
Logged
I started out with nothin' and I still got most of it left
Pages: [1] 2 3
« previous next »