« previous next »
Pages: 1 [2] 3

Author Topic: ERC Warbow  (Read 29560 times)

0 Members and 1 Guest are viewing this topic.

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: ERC Warbow
« Reply #15 on: August 29, 2007, 11:39:25 pm »
  And Justin, When that heartwood blows,It is duck and cover time.Looks like confetti.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: ERC Warbow
« Reply #16 on: August 30, 2007, 05:54:07 am »
Thanks for the info Marc - that was all I needed to continue with that one :).
Logged
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline heavybow

  • Member
  • Posts: 235
Re: ERC Warbow
« Reply #17 on: August 30, 2007, 07:23:39 am »
Marc Thats a killer bow. Cant wait to send you the monster yew stave, it should build a 160# bow. marlon ;D
Logged

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: ERC Warbow
« Reply #18 on: August 30, 2007, 07:28:01 am »
Marlon
You are giving me some really good upper body exercise building these monster bows :).
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

MattE

  • Guest
Re: ERC Warbow
« Reply #19 on: August 30, 2007, 01:28:28 pm »
You did well Marc. I only wish I could have known in advance that the stave was going to go side ways when dried.I have a few staves from the same section your stave came from and they all did the same thing. I usually get a fair read on a log. I missed on this one.My staves arn,t real bad ,just enough bend to be aggravating.:)
Logged

SimonUK

  • Guest
Re: ERC Warbow
« Reply #20 on: August 30, 2007, 04:38:24 pm »
Marc, could I ask how deep you drill the hole in your nocks? I'm worried about having too much dead weight at the end of my bow.
Logged

nick1346

  • Guest
Re: ERC Warbow
« Reply #21 on: August 30, 2007, 08:15:00 pm »
Hi Marc,

Nice looking bow, good bit of foward set. Horn nocks look large though?

Nick
Logged

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: ERC Warbow
« Reply #22 on: August 30, 2007, 09:59:02 pm »
Simon
These go in about 1 1/2" into the nocks.

Nick
Perhaps a bit large, certainly larger than the ones I made for Marlon's Yew bow.
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline Asiertxu

  • Member
  • Posts: 126
Re: ERC Warbow
« Reply #23 on: August 31, 2007, 04:47:35 am »
That´s beautifull bow Mark!!... 8)..REALLY IMPRESSIVE mate!!...
I´ve also a little log from "Juniperus Thurifera" that got last year, this species is really like the look and properties of "Juniperus Virginiana" but from Spain.. ;) ;D...
Hope to make mysef a warbow out of this log but perhaps not as heavy as yours Mark...
Oh!! Marlon, you´ll for sure have fun shooting in such a cool "monsters" that Mark is crafting for you!!..you are really luckly mate!!... ;)..
Cheers...
Asier.
Logged
//Asier from "Basque Country" Spain.

duffontap

  • Guest
Re: ERC Warbow
« Reply #24 on: September 06, 2007, 05:26:15 pm »
Wow Marc, that's really nice.  Just goes to show what a good bowyer can do (ie the impossible).

             J. D.
Logged

duffontap

  • Guest
Re: ERC Warbow
« Reply #25 on: September 06, 2007, 05:27:23 pm »
Wow Marc, that's really nice.  Just goes to show what a good bowyer can do (ie the impossible).

             J. D.
Logged

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: ERC Warbow
« Reply #26 on: September 06, 2007, 09:00:21 pm »
Thanks guys.

ERC heartwood is brittle but the sapwood is not and this bows back is sapwood. It doesn't have the elasticity of Yew or the compression strength but it makes a good bow.

You must be really impressed Josh to be repeating yourself :)
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Rod

  • Guest
Re: ERC Warbow
« Reply #27 on: September 07, 2007, 10:58:39 am »
That's the nicest looking piece of ERC I have ever seen and it looks like a proper English bow from here...
Rod.
Logged

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: ERC Warbow
« Reply #28 on: September 08, 2007, 09:08:55 am »
Why thank you Rod. Coming from you that is a compliment :)
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

MattE

  • Guest
Re: ERC Warbow
« Reply #29 on: September 08, 2007, 09:13:12 am »
Marc, are you insinuating that Rod is a critical judge of ELB,s ? :)
Logged
Pages: 1 [2] 3
« previous next »