« previous next »
Pages: 1 ... 41 42 [43] 44 45 ... 99

Author Topic: 2012 PA Bow Trade - Works In Progress  (Read 478824 times)

0 Members and 1 Guest are viewing this topic.

Offline RobWiden

  • Member
  • Posts: 99
Re: 2012 PA Bow Trade - Works In Progress
« Reply #630 on: March 05, 2012, 03:51:24 am »
I have my trade bow mostly built, and 300 arrows through it. That's at my draw length, which is 2" shorter than my recipient's. I'll gradually work it out to final draw weight and exercise it a few hundred times on the tiller tree, then it's time to pretty it up. Not sure how I'll go about that yet. If it were for me, I'd just wrap the handle and call it done 'cause I like the Plain Jane look but this one has to be special in some way. 
    I thought I'd have a friend show me how to do pictures, but it didn't happen. I still have to work on that somehow.    Rob
Logged
If I knew what I was doing, I'd probably be bored with it, and I wouldn't be here.

Offline Knapper

  • Member
  • Posts: 1,057
  • David Atnip
Re: 2012 PA Bow Trade - Works In Progress
« Reply #631 on: March 05, 2012, 10:06:34 am »
George the stave was cut in 09. The desing is Choctaw taken from TBB. Handle is 1 1/4 mid limb 1 5/8 tip is 3/4. It started with a little reflex , I wasnt concerned with removing any only stopping any further set from being introduced.
Logged
Ad Dare Servire
PM104250

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: 2012 PA Bow Trade - Works In Progress
« Reply #632 on: March 05, 2012, 10:12:21 am »
Quote from: Knapper on March 04, 2012, 07:18:49 pm
I'm working this piece of osage. The shortest bow I' ve yet to try 56 1/2 t2t. Got it braced and pulled to poundage at 14". I wasn't planning on backing it but the bow is starting to take a little set so should I back it now and then finish the tiller or vicey vercy??

Back it now and leave the tips alone. They are getting weak on you.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline HickoryBill

  • Member
  • Posts: 785
Re: 2012 PA Bow Trade - Works In Progress
« Reply #633 on: March 06, 2012, 12:10:06 am »
Well sadly looks like I'll have to try an Osage d  bow instead of the BBI.....I'm sure my recipient will be very disappointed... ::) ::)
Logged
"He who hesitates usually misses"
"All you really need to make a bow and arrow are some sticks and a deer carcass"
Bill Stockdill
Clarion County Pennsylvania

Offline coaster500

  • Member
  • Posts: 1,741
Re: 2012 PA Bow Trade - Works In Progress
« Reply #634 on: March 06, 2012, 01:01:11 am »
yea bill no one on PA would want an orange bow  >:D
Logged
Inspiration, information and instruction by the ton and it's free,,, such a deal :)

Offline gstoneberg

  • Member
  • Posts: 3,889
Re: 2012 PA Bow Trade - Works In Progress
« Reply #635 on: March 06, 2012, 01:57:32 am »
Quote from: Knapper on March 05, 2012, 10:06:34 am
George the stave was cut in 09. The desing is Choctaw taken from TBB. Handle is 1 1/4 mid limb 1 5/8 tip is 3/4. It started with a little reflex , I wasnt concerned with removing any only stopping any further set from being introduced.

Well I'm a little baffled, I don't see a problem with the design or the wood.  I'd finish it up and see what you get.  On the other hand, you could stop, add a couple courses of sinew, pull a little reflex back into it, and it'd likely end up about the way it is now.  But, that'll add some time to your build, 3-4 weeks I'd think.  I agree with Pearlie on the tiller.

George
Logged
St Paul, TX

Offline Gus

  • Member
  • Posts: 1,829
  • It's Time To Make Some Shavings!
Re: 2012 PA Bow Trade - Works In Progress
« Reply #636 on: March 06, 2012, 02:17:01 pm »
Knapper,

I'd consider Heat Treating the Belly and induce a bit of Reflex in the bow at the same time. It would only add a few days to a week to your build time allowing the bow to rehydrate after heat treating. This would take out the set you have now and add a few pounds to your draw weight.

-gus
Logged
"I taught him archery everyday, and when he got good at it he throw an arrow at me."

Conroe, TX

Offline paulsemp

  • Member
  • Posts: 1,918
Re: 2012 PA Bow Trade - Works In Progress
« Reply #637 on: March 06, 2012, 06:38:48 pm »
 Got my trade bow tillered out and is shooting very well. It is so many lbs at so many inchs and about so long. Needs some leather work, a new string, some sanding and a lot of oil. Hope to have it ready to ship in about 2 weeks.
Logged

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: 2012 PA Bow Trade - Works In Progress
« Reply #638 on: March 06, 2012, 06:41:39 pm »
Looks great Paul. I am sure so&so will be very happy/suprised!
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: 2012 PA Bow Trade - Works In Progress
« Reply #639 on: March 06, 2012, 08:48:56 pm »
Try duct tape to get your scales off Paul. That stuff will do anything!
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline paulsemp

  • Member
  • Posts: 1,918
Re: 2012 PA Bow Trade - Works In Progress
« Reply #640 on: March 06, 2012, 08:50:58 pm »
That is how i do it PEARL DRUMS/ thank you though! it is a great trick!
« Last Edit: March 06, 2012, 09:17:16 pm by paulsemp »
Logged

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: 2012 PA Bow Trade - Works In Progress
« Reply #641 on: March 06, 2012, 09:46:14 pm »
ok, someone try to read the measurements on his tiller, it better not read so many inches ::)
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline Elktracker

  • Member
  • Posts: 1,964
  • Josh
Re: 2012 PA Bow Trade - Works In Progress
« Reply #642 on: March 06, 2012, 11:50:26 pm »
That looks great Paul hope its coming my way ;D

Josh
Logged
my friends think my shops a mess, my wife thinks I have too much bow wood, my neighbors think im redneck white trash and they may all be right on the money!!

Josh Vance  Netarts OR. (Tillamook)

Offline criveraville

  • Member
  • Posts: 3,210
  • Psalm 127:4
Re: 2012 PA Bow Trade - Works In Progress
« Reply #643 on: March 07, 2012, 12:34:46 am »
Looks like 26 inches to me  ;)

Cipriano
Logged
I was HECHO EN MEXICO, but assembled in Texas and I'm Texican as the day is long...  Psalm 127:4 As arrows are in the hand of a mighty man; so are children of the youth.

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: 2012 PA Bow Trade - Works In Progress
« Reply #644 on: March 07, 2012, 12:52:39 am »
darn....
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what
Pages: 1 ... 41 42 [43] 44 45 ... 99
« previous next »