Author Topic: 2012 PA Bow Trade - Works In Progress  (Read 453640 times)

0 Members and 2 Guests are viewing this topic.

Offline Gus

  • Member
  • Posts: 1,829
  • It's Time To Make Some Shavings!
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1170 on: May 21, 2012, 04:30:58 pm »
Mighty Fine looking Bows passing through this thread...

Finally have this Dogwood Bow beginning to bend.
But it has Confounded me getting her straight, started with about four inches of lateral deflection, still has about three so far.
She's got two good size pass-through knot holes, one in each working limb just outside the fades.
Sixty Eight inches, shotting for Sixty pounds at ???...
Right now she's got one and three quarter inch wide parallel limbs out to within eight inches of the tips, narrowing to half inch.

Have an Osage stave skinned waiting in the wings in case something goes amiss... :)

Here she is in the middle of the last rasp and scraper session.




-gus

« Last Edit: May 21, 2012, 04:35:04 pm by Gus »
"I taught him archery everyday, and when he got good at it he throw an arrow at me."

Conroe, TX

Offline randman

  • Member
  • Posts: 647
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1171 on: May 21, 2012, 05:01:55 pm »
Gus, what did you do to get those puppies so tired they don't move?
Beauty is in the eye of the beer holder.

Offline Gus

  • Member
  • Posts: 1,829
  • It's Time To Make Some Shavings!
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1172 on: May 21, 2012, 05:16:11 pm »
Them are my Sled Dogs randman.
They're all tuckered out from a hard day at the office... ;D

In truth, the only time I have at the work bench lately is from 10pm to 2 or 3am.
They like to pile up and sleep around my feet while I work.
Six weeks old today, they sure are cute little buggers.

-gus
"I taught him archery everyday, and when he got good at it he throw an arrow at me."

Conroe, TX

Offline gstoneberg

  • Member
  • Posts: 3,889
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1173 on: May 21, 2012, 09:29:32 pm »
...George cant wait to see the finished product.and now I'm going to have to look back for pics of that BOW !

Wouldn't hurt for me to post a couple pics of the bow as it currently sits.  I have fought it all through tillering, have bent it in the handle twice.  Still, the string is just barely in the handle.  Interestingly, it shoots great.  I'm at the upper limit of my guy's weight range so I may intentionally thin the edges unevenly to try and induce a little twist to allow the string to come off the tips a little more squarely.  Then again, it shoots really nicely...







It is 65" n2n, but I'll keep the rest of the stats under wraps. :D

George
St Paul, TX

Offline beetlebailey1977

  • Member
  • Posts: 1,153
    • Bowhunters of South Carolina
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1174 on: May 21, 2012, 10:21:47 pm »
George she looks AWESOME!........Sorry to hear what happened Mullet.  Gus those pups must be pooped.  Also I apologize for not getting pics up yet of the bows I received from Johnston.  I am going to post them this week.  Been trying to get some good shots.
« Last Edit: May 21, 2012, 10:45:32 pm by beetlebailey1977 »
Happy hunting to all!
Bowhunters of South Carolina Executive council member
Professional Bowhunters Society Associate member

Reevesville, SC     James V. Bailey II

blackhawk

  • Guest
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1175 on: May 21, 2012, 11:14:17 pm »
Looking sweeeeeeeet george....good thing your hand isnt facing the other way in that last pic,otherwise you d be giving us the bird..lol  :laugh:

Offline gstoneberg

  • Member
  • Posts: 3,889
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1176 on: May 21, 2012, 11:27:33 pm »
Thanks. :)  I saw that too, but I was just too lazy to go out and retake the picture.  Not much gets by the group here, that's for sure. ;D

George
St Paul, TX

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1177 on: May 21, 2012, 11:29:25 pm »
I think he is trying to show us that the bow is as light as a bird.
Bowmakers are a little bent, but knappers are just plain flaky.

Offline Gus

  • Member
  • Posts: 1,829
  • It's Time To Make Some Shavings!
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1178 on: May 22, 2012, 12:03:42 am »
I hear ya Beetle...
Its the solid food, started pouring it to em last week and it flat knocks them out.

They make working at the workbench an adventure.
When they are passed out they are sweet little angles.
When they get a hot little puppy brawl going under foot, not so much... :)
With those little needle sharp teeth, its a wonder that Momma Dog will even come near em much less let em nurse...

They shortened a dozen Mulberry shoots that I am experimenting on making arrows out of yesterday.
Leaned the shafts against the workbench like normal, without thinking, walked in the house to get a Dew,
in five minutes they had chewed the end of every shaft... luckily the shafts were extra long. :)

-gus
"I taught him archery everyday, and when he got good at it he throw an arrow at me."

Conroe, TX

Offline bubby

  • Member
  • Posts: 11,054
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1179 on: May 22, 2012, 06:52:06 am »
damn fine looking stick you got going there George, Bub
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline MWirwicki

  • Member
  • Posts: 2,234
  • The wood speaks to you; Listen with your eyes. GSD
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1180 on: May 22, 2012, 09:28:28 am »
Looking good, George!  Plenty of character to boot. 
Matt Wirwicki
Owosso, MI

Offline Knapper

  • Member
  • Posts: 1,057
  • David Atnip
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1181 on: May 22, 2012, 11:47:51 pm »
Christmas in May!!A great big Thank You to Mat W ;D Walked back into my shop after lunch yesterday to find the post man had left me a pvc tube!!!
Whats inside but a beautiful Wiricki original fliped tip osage, sinew, snake :D Couldnt wait to get home and stretch the string.
You got it!! It shoots as good as it looks!! Thanks again Mat, she'll have a special place in the bow rack.
Ad Dare Servire
PM104250

Offline soy

  • Member
  • Posts: 2,897
  • pm106221
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1182 on: May 23, 2012, 03:13:19 am »
Cool beans!i would love to take that one for a stroll through the woods...congratulations!  :o
Is this bow making a sickness? or the cure...

blackhawk

  • Guest
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1183 on: May 23, 2012, 04:53:04 pm »
congrats knapper,and nice job matt  8)

blackhawk

  • Guest
Re: 2012 PA Bow Trade - Works In Progress
« Reply #1184 on: May 23, 2012, 04:58:14 pm »
heres parting shots of a black locust andaman holmgaard arriving soon too someones door  8)









hopefully we see some more shots of her soon  ;)