« previous next »
Pages: [1] 2 3 ... 8

Author Topic: Winter project #2  (Read 28022 times)

0 Members and 1 Guest are viewing this topic.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Winter project #2
« on: January 13, 2012, 07:21:28 pm »
This is the yew stave that Keenan gave me last year at the Classic. He had already shaped it into a Pacific Northwest style paddle bow. It had pretty thick sapwood on it so I thinned it to about 3 or 4 rings. There are some violations above those rings but this bow will be sinew backed. Here it what it looked like early this week...




  I've been reducing the bellyquite a bit but it is still quite stiff. I did get about 2" of tip movement at floor tiller so I decided it was time to flip the tips, not much, just a gentle flip. The first limb went very well. The second limb has a knot at one side of the tip. I knew it would be a problem and it was. As I began to bend this tip I heard a crack and noticed the knot gave way. It didn't seperate from the limb so I filled it with super glue. It is in a non bending part of the tip so I'm not worrying about it.


here is the knot. You might be able to see where it seperated ...




...and the end results...
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline seabass

  • Member
  • Posts: 2,267
Re: Winter project #2
« Reply #1 on: January 13, 2012, 07:27:16 pm »
nice job Pat.i hope Keenan brings some yew to the classic this year.i have been wanting to give it a try.i have some horn nocks so i want to build an elb.good luck on your paddle bow,Steve
Logged
Middletown,Ohio

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Winter project #2
« Reply #2 on: January 13, 2012, 07:57:31 pm »
Lookin' good.
Del
Logged
Health warning, these posts may contain traces of nut.

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Winter project #2
« Reply #3 on: January 13, 2012, 08:22:45 pm »
Are you planning on sinew backing that Pat?  I have a short piece of yew from Keenan that I'm saving for a special build.  I'll be watching your progress closely.
Logged
I started out with nothin' and I still got most of it left

Offline Elktracker

  • Member
  • Posts: 1,964
  • Josh
Re: Winter project #2
« Reply #4 on: January 13, 2012, 08:55:11 pm »
Look forward to this one as well!

Josh
Logged
my friends think my shops a mess, my wife thinks I have too much bow wood, my neighbors think im redneck white trash and they may all be right on the money!!

Josh Vance  Netarts OR. (Tillamook)

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Winter project #2
« Reply #5 on: January 13, 2012, 09:17:42 pm »
Nice... I love your build alongs. I usually drool over your work bench and vice/tip flipping forms just as much as your bows... (if your wonderin why I'll just let you know that my work bench has been a combination of a back porch and my wife's dresser for about 2 years now...)
« Last Edit: January 14, 2012, 01:43:49 am by toomanyknots »
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline Catahoula

  • Member
  • Posts: 222
Re: Winter project #2
« Reply #6 on: January 13, 2012, 09:43:25 pm »
Wow,

That knot woulda scared the bejesers outta me Pat.  I have been working on a hornbeam for about a year now...mostly staring at it saying to it "change into a bow" but that doesn't seem to be working so now I am praying over it...  Sure is nice to see a master at his work!

Rand
Logged
“You only live once, but if you do it right, once is enough.”― Mae West

Offline gstoneberg

  • Member
  • Posts: 3,889
Re: Winter project #2
« Reply #7 on: January 13, 2012, 11:34:34 pm »
I love your build-a-longs too Pat.  Always something new to learn.  Gonna be a nice bow.

George
Logged
St Paul, TX

Offline Keenan

  • Member
  • Posts: 4,824
Re: Winter project #2
« Reply #8 on: January 13, 2012, 11:41:29 pm »
That is looking really good Pat, You should be ok with the tip. Just keep it a little stiffand non bending like you said.  ;)
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Winter project #2
« Reply #9 on: January 14, 2012, 01:15:44 am »
Keenan, with longer yew bows I got quicker reactions from wood removal than I am with this shorty. Is that common? I keep taking wood off and it still don't want to bend much.  >:(
  Randy, if it breaks, it breaks. Worrying doesn't build bows.  ;) You need to get here in July so we can get that bow of yours finished!  ;D
 TMK mkost all scrounged or thrown together. Nothing special here...cept my mess!  ;D
  Definately sinew backing this puppy, Clint.
  Thanks George, Del, Josh and steve. Stay tuned in. This project should last all winter.  ;D
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline swamp yeti

  • Member
  • Posts: 640
Re: Winter project #2
« Reply #10 on: January 14, 2012, 01:31:07 am »
That is going to be another nice one Pat.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Winter project #2
« Reply #11 on: January 14, 2012, 01:54:13 am »
Thanks Yeti. I'm looking forward to doing this little bow.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

TurtleCreek

  • Guest
Re: Winter project #2
« Reply #12 on: January 14, 2012, 05:00:08 am »
This style definitely interests me, I look forward to your progress
Logged

Offline soy

  • Member
  • Posts: 2,897
  • pm106221
Re: Winter project #2
« Reply #13 on: January 14, 2012, 07:17:40 am »
Yes, yes, yes ;D I can't stand it ...that thing is gonna be so cool ;)
Logged
Is this bow making a sickness? or the cure...

Offline Dazv

  • Member
  • Posts: 472
Re: Winter project #2
« Reply #14 on: January 14, 2012, 09:34:29 am »
I can't wait to see this one all finished up.
Logged
Pages: [1] 2 3 ... 8
« previous next »