brass casings for blunts needed!

[bowtarist]

I'm in need of some brass shell casings to use for blunts on 11/32" arrows.  Anybody got any?  We'll work out the trade.  I need em pretty quick.  I thought I had some, but was wrong again. Thanks, dpgratz

[jeffhalfrack]

Can you  use      .38   .357?     How  many?    Let me know  jeffw

[bowtarist]

Either size should work beautifully.  I sent a PM.

[fishfinder401]

if i were you i would leave the bullet in them, add a little more punch

[Elktracker]

If half rack cant help ya let me know, The only difference between the two is length and either tends to be on the light side, I like to heat up some lead and add to mine before putting them on the shaft. I have allot so let me know if you dont get any.

Josh

[bowtarist]

Cool, thanks Josh.  I would probably like the longer ones.  I'm using them to make leather covered blunts.  I'll add the weight too.  That was my plan.  Just need to get a few ASAP for the Christmas Exchange. 

[Elktracker]

Get me your address and how many and ill get them out today

Josh

[jermcramp1]

Got plenty here too if you need.

[bowtarist]

Thanks guys.  I'll try to get you back when I can.  I need 3, would like 6 and could use as many as I can get.

Derik Gratz
9450 E. Baby Creek RD.
Bloomington, Indiana 47408

YOU GUYS ARE THE BEST.  SO HAPPY I FINALLY GOT ON THE WEB SITE.

[Elktracker]

I will get you 6 sent out ASAP, probably be more like tomorrow as I had a change of plans for today. Heading over to Strunks to do some work with him in the shop.

Josh