« previous next »
Pages: [1] 2 3

Author Topic: Building a bow jigs  (Read 11204 times)

0 Members and 1 Guest are viewing this topic.

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Building a bow jigs
« on: July 20, 2011, 11:23:14 pm »
I retitled this post so that people could share ideas and and discuss projects that they are working on. 


Ok when I was at twin oaks I had a discussion about how to build a bow bending jig.  I forgot to ask how long I need to make the jig.   Now my bow will be 62 inches long so should the jig also be 62 inchs long
« Last Edit: July 24, 2011, 09:00:19 pm by iowabow »
Logged
(:::.) The ABO path is a new frontier to the past!

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: building a bow jig and new help
« Reply #1 on: July 20, 2011, 11:25:56 pm »
If your talking about a caul I make mine 72" so I can handle any length bow I may try. The shorter the bow the less relfex obviously.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: building a bow jig and need help
« Reply #2 on: July 20, 2011, 11:43:41 pm »
ok the jig was layed out so that it was divided in half and then each half into 12 segments along its length and width  Then progressive lines drawn and then cut along the line to create jig.
« Last Edit: July 20, 2011, 11:52:22 pm by iowabow »
Logged
(:::.) The ABO path is a new frontier to the past!

blackhawk

  • Guest
Re: building a bow jig and need help
« Reply #3 on: July 21, 2011, 12:49:11 am »
Logged

Offline Will H

  • Member
  • Posts: 2,120
Re: building a bow jig and need help
« Reply #4 on: July 21, 2011, 01:01:39 am »
Blackhawk posted a pretty good link John. I used the same buildalong when I built mine, I just added a bit more curve. This should answer your questions.  :)
Logged
Proud Member of Twin Oaks Bowhunters
           Clarksville, Tennessee

   "Middle Tennessee is the place to be"

Offline MWirwicki

  • Member
  • Posts: 2,234
  • The wood speaks to you; Listen with your eyes. GSD
Re: building a bow jig and need help
« Reply #5 on: July 21, 2011, 01:16:28 am »
Okay try to picture this.  Start with a 72" 2x6.  Draw a center line with a tri-square across the width of the board (at 36 inches doing the math).  Draw subsequent lines 6 inches away from center on both sides of center.  The 6th line from center should be at the end of the board.  Now, take the end of the board,  start at the top draw 5 marks every 1/2 inch.  Do this on both ends of the 2x6.  The bottom (5th) mark will be 3-inches down from the top.  This will provide a 3 inch reflex at 72 inches.  So, if you draw a horizontal line from your first 1/2-inch mark to your 1st (6 inches from center) 6 inch mark you will have an intersecting point.  Do this for the 2nd 1/2 inch mark on the edge to your 2nd (12 inches from center) mark and so on.  Do this on both ends of the board.  Where each of the lines intersect, you will connect the dots forming your arc.  Cut out the arc.

Hope I explained it in words well enough.  If I didn't, I'll post a picture of one of mine.
Logged
Matt Wirwicki
Owosso, MI

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: building a bow jig and need help
« Reply #6 on: July 21, 2011, 03:53:37 am »
It was explained to me that the curve becomes increasing greater at it reaches the tips due to the math in the layout.  I can't remember his name but he explained that the increase in ratio was required because the bow will tend to take more set as you proceed to the tips.  So I was wondering if that meant that each bow length would require a seperate jig so that the math ratio would work out corrrectly. 
Logged
(:::.) The ABO path is a new frontier to the past!

Offline Gus

  • Member
  • Posts: 1,829
  • It's Time To Make Some Shavings!
Re: building a bow jig and need help
« Reply #7 on: July 21, 2011, 05:17:17 am »
Gary Davis shows the making of a form complete with his math and layout. (picked up the DVD from 3 Rivers)

Rattlestick Bows.

I'll be building one this weekend...  ;D

-gus
Logged
"I taught him archery everyday, and when he got good at it he throw an arrow at me."

Conroe, TX

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,198
  • if you have to ask you wouldn't understand ,Tenn.
Re: building a bow jig and need help
« Reply #8 on: July 21, 2011, 07:27:55 am »
Gary was who he was talking to.It is a good DVD. :)
Pappy
« Last Edit: July 21, 2011, 07:32:26 am by Pappy »
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

blackhawk

  • Guest
Re: building a bow jig and need help
« Reply #9 on: July 21, 2011, 08:35:02 am »
You can use the same form for most bows. You can increase or decrease reflex by using shims,and change where you want the reflex the most by shimming. That link will answer everything
Logged

Offline MWirwicki

  • Member
  • Posts: 2,234
  • The wood speaks to you; Listen with your eyes. GSD
Re: building a bow jig and need help
« Reply #10 on: July 21, 2011, 01:48:19 pm »
Yes, what I tried to type out is Gary's method.
Logged
Matt Wirwicki
Owosso, MI

Offline Buckeye Guy

  • Member
  • Posts: 3,033
Re: building a bow jig and need help
« Reply #11 on: July 21, 2011, 04:22:14 pm »
Sounds like Gary's method !
yes you will want differant length forms for diff. length bows but only if your off by more than a few inches !
the video will show you that Gary uses several diff. ones
I recommend anyone that does not have the video get it!!!!
 Guy
Logged
Guy Dasher
The Marshall Primitive Archery Rendezvous
Primitive Archery Society
Having  fun
To God be the glory !

Offline Gus

  • Member
  • Posts: 1,829
  • It's Time To Make Some Shavings!
Re: building a bow jig and need help
« Reply #12 on: July 21, 2011, 04:58:16 pm »
Watching Gary's DVD even as I type this...

Sorry I have been known to beat a dead horse...  ;D

Yes Sir Pappy I do like Gary, he has been very helpful, and I like his style.
Have one of his bow staves leaning in the corner.
Being a new builder-in-training (can't say young cause I ain't) I use his stave and DVD for guidance quite a bit.
And I'm assembling one of his jigs this week.   :)
 
-gus
Logged
"I taught him archery everyday, and when he got good at it he throw an arrow at me."

Conroe, TX

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: building a bow jig and need help
« Reply #13 on: July 22, 2011, 01:34:08 am »
i will be ordering one tonight
Logged
(:::.) The ABO path is a new frontier to the past!

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: building a bow jig and need help
« Reply #14 on: July 22, 2011, 01:49:43 am »
Thanks everyone for responding to this post all of the information was great! I will post a few picks of the jig once I get it done.
Logged
(:::.) The ABO path is a new frontier to the past!
Pages: [1] 2 3
« previous next »