« previous next »
Pages: [1]

Author Topic: Just curious?  (Read 1614 times)

0 Members and 1 Guest are viewing this topic.

Offline nclonghunter

  • Member
  • Posts: 1,779
Just curious?
« on: June 16, 2011, 08:17:19 pm »
How many knappers here saw their own preforms or are using sawed preforms to make points?

Is it a common method now or do most still break a large piece from a spall and take it down from there...Just curious?
Logged
There are no bad knappers, only bad flakes

Offline bubby

  • Member
  • Posts: 11,054
Re: Just curious?
« Reply #1 on: June 16, 2011, 08:33:22 pm »
I'm using slabs right now, but once I get my to do list whitled down some gonna start trying some percusion, Bub
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Just curious?
« Reply #2 on: June 16, 2011, 09:26:50 pm »
I saw Osidian and now Tallahatta that I found it cuts real easy.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Tower

  • Member
  • Posts: 2,298
Re: Just curious?
« Reply #3 on: June 16, 2011, 11:15:33 pm »
Rarely do I use slabs. I'm not opposed to them . I'm fortunate enough to live in a state that's rich in knapping material.
Logged
He who sacrifices freedom for a security deserves neither one.  Benjamin Franklin!

Offline FlintWalker

  • Member
  • Posts: 2,577
Re: Just curious?
« Reply #4 on: June 16, 2011, 11:52:01 pm »
About the only time I use a slab is when it's thick enough to use percussion on. I'm no good at working them so I don't buy them.
Logged
Be thankfull for all you have, because no matter how bad you think it is...it can always be worse.

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: Just curious?
« Reply #5 on: June 17, 2011, 02:20:01 pm »
I suppose that I would use a rock saw if I had one:  it saves material.  I've worked slabs and they are OK but I prefer to work spalls, blades, and flakes.  I might have a friend cut some of my rare material (like Alibates) but I don't spend much money on slabs.  I'll work glass before I'll work on a slab.
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Just curious?
« Reply #6 on: June 17, 2011, 06:12:51 pm »
That's me. I bought some slabs when i started just trying everything out - still have most of em in a bucket. I like bi-facing those odd shaped rocks to see what i can get. Like Tower, i have a plentiful supply so don't worry too much about wasting material. Though, id prolly use a saw if i had one..
Logged
When you come upon a track or trail you do not know, follow it to the point of knowing.
Pages: [1]
« previous next »