Author Topic: Another Ken Challenge Shorty - Finished  (Read 10215 times)

0 Members and 2 Guests are viewing this topic.

Offline gstoneberg

  • Member
  • Posts: 3,889
Re: Another Ken Challenge Shorty - Finished
« Reply #30 on: July 23, 2011, 11:24:44 pm »
Final stats, 51.5" n2n, 60lbs @ 27" (which is where I plan to shoot it).  It feels creepy to feel so much bend at 28".  It picked up over 10lbs with heat treatment.  It has about 2" of set in the top limb, the bottom limb is still about where it started with 2" of deflex.  For a little bow, it shoots with authority.





George
St Paul, TX

Offline SEMO_HUNTER

  • Member
  • Posts: 209
  • Southeast Mo. Redneck!!
Re: Another Ken Challenge Shorty - Finished
« Reply #31 on: July 24, 2011, 11:44:57 am »
Looks great George! Nice job.  8)
Boy that sure is a snakey son of a gun looking at the pic down the belly on page 2, that just goes to show that a bow doesn't have to be board straight to shoot well. All it needs in the string fairly close to center or favoring the side of the bow with the arrow on it.
~Varitas Vos Liberabit~ John 8:32

Offline ken75

  • Member
  • Posts: 1,886
  • crepe myrtle is my "yella wood"
Re: Another Ken Challenge Shorty - Finished
« Reply #32 on: July 24, 2011, 04:21:51 pm »
looks like you did a great job George , enjoy it ! should be a good blind bow if ya get tired of vaporizing them hogs with the rifles.

Offline gstoneberg

  • Member
  • Posts: 3,889
Re: Another Ken Challenge Shorty - Finished
« Reply #33 on: July 24, 2011, 05:53:22 pm »
Thanks guys, I haven't quite mastered the tiller on the bendy handled bows yet.  I sure like the way this one shoots though.  If my primitive arrows shoot well with it I might take it out to the lease this next weekend.  Still need to put a couple more coats of finish on it.

George
St Paul, TX