Author Topic: BACK SINEW  (Read 6876 times)

0 Members and 1 Guest are viewing this topic.

Offline crooketarrow

  • Member
  • Posts: 2,790
BACK SINEW
« on: April 19, 2011, 03:32:49 pm »
    I need some back sinew steer,elk,sheep,buffalo.
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline Eric Garza

  • Member
  • Posts: 589
Re: BACK SINEW
« Reply #1 on: April 20, 2011, 04:06:39 pm »
I have lots of processed whitetail deer back sinew.  What do you have to trade?

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: BACK SINEW
« Reply #2 on: April 21, 2011, 12:10:29 pm »
  How long is it.
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline Eric Garza

  • Member
  • Posts: 589
Re: BACK SINEW
« Reply #3 on: April 22, 2011, 12:09:13 pm »
Fiber lengths range from 6 inches up to 12.  Occasionally fibers are shorter or longer.

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: BACK SINEW
« Reply #4 on: April 23, 2011, 12:06:40 pm »
   I thank you but I like longer one peice for hafting arrows. I really don't like to tie them together and have the knots. I've got plenty of deer sinew to do that with if I want to. But THANKS anyway.
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: BACK SINEW
« Reply #5 on: April 23, 2011, 07:26:36 pm »
What do you mean tie in knots? Why would you tie the sinew in a knot to half an arrow?
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: BACK SINEW
« Reply #6 on: April 23, 2011, 07:28:09 pm »
                                     Ya Got Me........ ???........... ???.......... ???.......... ::)
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline Eric Garza

  • Member
  • Posts: 589
Re: BACK SINEW
« Reply #7 on: April 24, 2011, 12:06:19 pm »
You can also shred the sinew very finely and twist fibers together to form a longer thread.  This is what I've always done.  But it sounds like you've found something that works for you, so no reason to change.

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: BACK SINEW
« Reply #8 on: April 26, 2011, 07:38:59 am »
  Have over laped when raping 100's of shalfs put like to really tighten and keep the tenion on it as I rap. Can't no this with short peices.
  Over the last 5 years I've used long sinew raps much tighter.
 I'll also braided it a couple times but like I said one peice works much better and you can really keep it tight as you rap it. I've found out just works better. Just the way I do it.
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING