Author Topic: Sinew and Black Maple NEW FULL DRAW PICS (Read 7286 times)

hammertime · « **on:** February 02, 2011, 10:23:20 am »

Hello all heres a sinew backed black maple 55" long,50#@20".2 1/4 @ fades to 1/2 nocks.Homemade deer rawhide handle wrap first time working with sinew so don't laugh to hard.Really fought the twist and week spot when tillering.Need to tweek yet for full draw thanks for the advice Keenan-Thanks for looking-Hammertime. Not for BOM

sadiejane · « **Reply #1 on:** February 02, 2011, 10:28:17 am »

nice! really like to see some cloe-ups of that sinew backing.
have a yew stave that when i get it going, will be sinew backed.
haven't done sinew before but looking forward to getting to that point with the yew.
thanks

hammertime · « **Reply #2 on:** February 02, 2011, 10:37:27 am »

a few more

hammertime · « **Reply #3 on:** February 02, 2011, 10:40:29 am »

last ones

hammertime · « **Reply #4 on:** February 02, 2011, 10:46:24 am »

here's first "full draw"-working on this yet

hammertime · « **Reply #5 on:** February 02, 2011, 10:50:00 am »

Thanks sadiejane -tips are sinew wraps thanks again for the sinew Tell-and thanks to all for the inspiration

Parnell · « **Reply #6 on:** February 02, 2011, 10:51:31 am »

Looks good to me. I'm sorting through my first sinew project also. Great job!

hammertime · « **Reply #7 on:** February 02, 2011, 11:35:09 am »

Thanks Parnell yeah the sinew project was interesting seemed to get hide glue over everything-Hammertime

sadiejane · « **Reply #8 on:** February 02, 2011, 11:41:12 am »

amazing! really digging this bow. thanks for all the close-ups
did you use actually hide glue? some you made yrself? the crystals or powder? or knox?

half eye · « **Reply #9 on:** February 02, 2011, 12:54:01 pm »

Very nice, seen the transverse wrapping on some native bows, yours looks way nice, seems like there is no way for any of the wood to get away....in any direction.
rich

rileyconcrete · « **Reply #10 on:** February 02, 2011, 02:18:05 pm »

Nice bow. Glad you put that sinew to good use.

Tell

SiongSA · « **Reply #11 on:** February 02, 2011, 02:19:49 pm »

very nice! whats black maple, like to work with?

adb · « **Reply #12 on:** February 02, 2011, 05:55:55 pm »

What is black maple? I've never heard of it. Also, if that was my bow, I'd get a little more work out of the first third of the top limb, just above the fade.

hammertime · « **Reply #13 on:** February 02, 2011, 08:27:32 pm »

Thanks all for the comments and looking I got the black maple on a trade a know little about it-it was fairly easy to work i.e with scrapers etc had a twist that took several rounds with the heat gun to try eliminate,has taken little set and flings an arrow well but I only pull it to 20" so far not real trusting of it yet and need to touch up the tiller Hammertime

hammertime · « **Reply #14 on:** February 06, 2011, 01:03:38 pm »

Got some better full draw pics after touch up the tiller-still not perfect but I"m happy this bow was a challenge for me and I think it turned out ok.55#@24" thanks for looking -Hammertime

Primitive Archer

Author Topic: Sinew and Black Maple NEW FULL DRAW PICS (Read 7286 times)

hammertime

Sinew and Black Maple NEW FULL DRAW PICS

sadiejane

Re: Sinew and Black Maple

hammertime

Re: Sinew and Black Maple

hammertime

Re: Sinew and Black Maple

hammertime

Re: Sinew and Black Maple

hammertime

Re: Sinew and Black Maple

Parnell

Re: Sinew and Black Maple

hammertime

Re: Sinew and Black Maple

sadiejane

Re: Sinew and Black Maple

half eye

Re: Sinew and Black Maple

rileyconcrete

Re: Sinew and Black Maple

SiongSA

Re: Sinew and Black Maple

adb

Re: Sinew and Black Maple

hammertime

Re: Sinew and Black Maple

hammertime

Re: Sinew and Black Maple NEW FULL DRAW PICS