« previous next »
Pages: [1] 2

Author Topic: How Did They Make These?  (Read 3521 times)

0 Members and 1 Guest are viewing this topic.

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
How Did They Make These?
« on: January 07, 2011, 11:47:14 am »
Maybe some of you fintknapping virtuosos can tell me how these were made.  These are ancient arrowheads from Asia.  They have tips that are burinated.

Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline leapingbare

  • Member
  • Posts: 2,028
    • http://www.flintknappers.com/jessewright/
Re: How Did They Make These?
« Reply #1 on: January 07, 2011, 11:54:56 am »
not 100% sure but id say much like how the base is done on a dacator. just flake away from the tip in both directions.
 cool points and a cool idea!
thanks for posting.
Logged
Mililani Hawaii

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: How Did They Make These?
« Reply #2 on: January 07, 2011, 12:11:09 pm »
Thanks Jesse.  It looks like pressure flaking to me.  But I've only done burins with percussion.

What's a dacator?
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline rileyconcrete

  • Member
  • Posts: 606
Re: How Did They Make These?
« Reply #3 on: January 07, 2011, 12:16:48 pm »
Those are cool.  Dont have a clue how you could do that.

Tell
Logged
Tell Riley

Offline jamie

  • Member
  • Posts: 2,387
  • born again pagan ,dirt worshipping heathen
Re: How Did They Make These?
« Reply #4 on: January 07, 2011, 01:39:14 pm »
very cool. thats tough to do . my buddy up here showed me some points he did with burinated tips. he uses static pressure to do it. the flaking tool stays still and the point  is pressed into the tool.
Logged
"Man is a tool-using animal. Without tools he is nothing, with tools he is all."

waterbury, ct

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: How Did They Make These?
« Reply #5 on: January 07, 2011, 01:52:07 pm »
hmmm...
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline jamie

  • Member
  • Posts: 2,387
  • born again pagan ,dirt worshipping heathen
Re: How Did They Make These?
« Reply #6 on: January 07, 2011, 01:58:55 pm »
just spit juice all over the computer when i saw that pat!!!!!!!
Logged
"Man is a tool-using animal. Without tools he is nothing, with tools he is all."

waterbury, ct

Offline sailordad

  • Member
  • Posts: 5,045
Re: How Did They Make These?
« Reply #7 on: January 07, 2011, 04:04:54 pm »
philflitstone over on paeoplanet
recently made some points like that,just around thanksgiving i believe
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: How Did They Make These?
« Reply #8 on: January 07, 2011, 05:09:11 pm »
Thanks Sailordad..  I'll have a look.

Sorry about that Jamie...  (not really) >:D  :D
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline billy

  • Member
  • Posts: 1,233
Re: How Did They Make These?
« Reply #9 on: January 10, 2011, 05:03:13 pm »
Wow...now those are really cool looking. Talk about cut on contact  >:D
Logged
Marietta, Georgia

Offline leapingbare

  • Member
  • Posts: 2,028
    • http://www.flintknappers.com/jessewright/
Re: How Did They Make These?
« Reply #10 on: January 10, 2011, 05:11:13 pm »
I think i might have to try this.
If i figer it out i'll probably start makeing my hunting points this way.
Logged
Mililani Hawaii

Offline AncientArcher76

  • Member
  • Posts: 1,113
Re: How Did They Make These?
« Reply #11 on: January 10, 2011, 10:26:21 pm »
Decators are notthat hard I will post a  pic on the said to believed process! 

But upon closer inspection my guess and on the above points from the ancient european points I have saw were made from sharp flakes!  The would take core blades or flakes that were almost in the shape of an arrowhead then touch them up.  If I were going to leave my trade mark I might have done the same way leaving the front left side tip un touched leaving a straight razor edge in place.  Make sense? 
Russ
« Last Edit: January 10, 2011, 10:33:19 pm by AncientArcher76 »
Logged
Time, dedication, cuts, tons of broken rock, a wife, and perhaps a few girlfriends are some of what it takes in becoming a skilled flint knapper!!!
 
"Ancient Art"  by R. Hill

Offline JW_Halverson

  • Member
  • Posts: 11,928
Re: How Did They Make These?
« Reply #12 on: January 10, 2011, 10:32:52 pm »
Oh would I like to get my mitts on a hatful of those arrowheads.  That, my good people, is what hunting heads look like!  Very sweet.

Can you post where in Asia these points originated and a timeframe?
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline rwaterman00

  • Member
  • Posts: 59
Re: How Did They Make These?
« Reply #13 on: January 11, 2011, 02:44:14 am »
ahh grasshopper ancient chinese secret
when you can make tip like this you can leave the school
 ;D
i am gonna try this i think they just pressure flake from the point kinda like fluteing but from front to back on an angle
Logged

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: How Did They Make These?
« Reply #14 on: January 11, 2011, 11:05:07 am »
JW, these are part of a larger collection of arrowheads from Mongolia, China, and Kazakstan...  so I don't know exactly where they originated or if they are from the same area.  Out of a hundred or so, only about a dozen were like this.  The pictures of the collection were posted on another forum.

I don't know about the time frame.  Probably after the atlatl and before the bronze age in Asia.   >:D
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr
Pages: [1] 2
« previous next »