« previous next »
Pages: [1]

Author Topic: Ipe Bow best design?  (Read 4543 times)

0 Members and 1 Guest are viewing this topic.

Offline swimbill

  • Member
  • Posts: 79
Ipe Bow best design?
« on: December 29, 2010, 01:52:12 pm »
Hi

Just picked up several 1X4 Ipe boards 3/4 thick.  What do you think the best design is for this wood  ???.  I am considering a flat bow or a pyramid bow.  Any advice is appreciated.

Swimbill
Logged

Offline 0209

  • Member
  • Posts: 107
Re: Ipe Bow best design?
« Reply #1 on: December 29, 2010, 03:31:19 pm »
Go with a narrow limbed ELB.  Ipe is a great wood, probably my favorite for bow building.  It's just so dense and it doesnt take a whole lot to make a good hunting bow out of.  What are you going to back it with?...
-Ian
Logged
Somewhere a True Believer is training to kill you. He is training is austere conditions with minimal food and water. He doesn't worry about what workout to do.his ruck weighs what it weighs and his runs end when the enemy stops chasing him. Only he knows the cause. Still want to Quit?
-Unknown

Offline swimbill

  • Member
  • Posts: 79
Re: Ipe Bow best design?
« Reply #2 on: December 29, 2010, 05:00:05 pm »
No idea any suggestions?
Logged

Offline bcbull

  • Member
  • Posts: 541
Re: Ipe Bow best design?
« Reply #3 on: December 29, 2010, 05:03:57 pm »
saw  em into 1/2 slats  even 3/8  back it with hickory  or better bamboo  wear a respiator  while sawing it or sanding  ipe is very bad  for ya and gloves   while working it   brock
Logged

Offline Badger

  • Member
  • Posts: 8,124
Re: Ipe Bow best design?
« Reply #4 on: December 29, 2010, 05:21:39 pm »
Ipe will make a nice elb but depending on the draw weight you are looking for they should be considerably shorter than what you would expect from a lighter wood. For a 50# elb style I would not go longer than 62". Also makes nice pyramids and any other style boy you may want to consider.
Logged

Offline swimbill

  • Member
  • Posts: 79
Re: Ipe Bow best design?
« Reply #5 on: December 30, 2010, 10:54:23 am »
If I go with a bamboo backed bow any suggestions on were to get the bamboo?  I have some hickory but it is not very good.  Could I use linen for a backing?
swimbill
Logged

Offline n2huntn

  • Member
  • Posts: 468
  • jeff_smith13@hotmail.com ROLL TIDE !
Re: Ipe Bow best design?
« Reply #6 on: December 30, 2010, 11:43:39 am »
Knightd, good guy and good boo too.
Jeff
Logged
Genesis 27: 3

Offline Gary Mac

  • Member
  • Posts: 29
Re: Ipe Bow best design?
« Reply #7 on: December 30, 2010, 12:20:19 pm »
Would Ipe work well as a hickory backed Holmegaard?
Logged

Offline ShinneryOak

  • Member
  • Posts: 81
Re: Ipe Bow best design?
« Reply #8 on: December 30, 2010, 05:21:10 pm »
swimbill, missouritrading.com has good bamboo also (but no ipe). I'm just finishing my first boo-backed ipe and hope to post it soon. Mine is a skinny pyramid, 63" overall, 61.5" nock to nock, about 1.1" wide at fades. 50# at 28". Glued in 5" reflex and it holds about 3/4" after tiller.  If you've never used bamboo before, there's a lot to learn, I ruined 3 pieces before this one came out OK.  I'm also glad I got a bench type belt sander, you have to first cut the boo to the bow shape, then sand it to a knife edge all  the way around or it'll be way too thick.
Logged
Pages: [1]
« previous next »