Author Topic: Tiller check on stubborn osage-updated photos  (Read 3851 times)

0 Members and 2 Guests are viewing this topic.

Offline Keenan

  • Member
  • Posts: 4,824
Re: Tiller check on stubborn osage
« Reply #15 on: December 16, 2010, 12:43:30 am »
Iowabow, send me your mailing address and I'll send you a couple gizmo's. Compliments of a good friend named Dave H. that made me a box full of them for rendezvous gifts.  ;)

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: Tiller check on stubborn osage
« Reply #16 on: December 18, 2010, 10:05:25 pm »
I managed to get an hour of free time today and did a little more yellow wood removal.

Here is the unbraced view.



Braced to 4.5"



And drawn to 23".  It still might be a little flat on the right outer limb, but it is better.  The left limb being shorter makes it look a little off to me.  I am aiming for 55# @ 27", so I might round off the edges of the limbs a little and then sand the tool marks out and see where I am at.

I started out with nothin' and I still got most of it left

Offline Del the cat

  • Member
  • Posts: 8,300
    • Derek Hutchison Native Wood Self Bows
Re: Tiller check on stubborn osage-updated photos
« Reply #17 on: December 19, 2010, 06:34:12 am »
Looks pretty good to me.
Del
Health warning, these posts may contain traces of nut.

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Tiller check on stubborn osage-updated photos
« Reply #18 on: December 19, 2010, 09:59:43 am »
Looks quite good. Good work. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline n2huntn

  • Member
  • Posts: 468
  • jeff_smith13@hotmail.com ROLL TIDE !
Re: Tiller check on stubborn osage-updated photos
« Reply #19 on: December 19, 2010, 01:29:49 pm »
right limb in photo flat in inner 1/3?
Jeff
Genesis 27: 3

Offline adb

  • Member
  • Posts: 5,339
Re: Tiller check on stubborn osage-updated photos
« Reply #20 on: December 19, 2010, 03:22:09 pm »
I'd call that done if it was mine.